GTi14 network connectivity issues

NEOFLECT

Hello,
I’ve had my GTi14 for a little over a year and had no problems with it previously, up until a few weeks ago when it started having network connectivity issues. It connects to my home wifi network on startup, but then within a few minutes the connection becomes weak/flickers in and out or drops entirely. Network & internet settings always show that the PC is fully connected, but nothing loads in the browser and apps say there’s no internet connection. I’ve tried resetting network adapters, power cycling the router, power cycling the PC. I see a few people here have had similar wifi issues in the past and were told to clear their CMOS but I’m not entirely sure how to do that as I can’t find anything labeled CMOS on the machine or in the user manual.

Attaching an image of the sticker on the bottom of my machine for further info.

Beelink CS-Jane

@“NEOFLECT”#p33470Hi there,the CMOS hole is located in the audio jack.
Here are some potential solutions:
1.Please clear the CMOS. Please turn off the PC , unplug the power supply, and put the pin in the pinhole and press it for about 10 seconds , restart the PC after ten minutes.

Please uninstall the wifi driver and then restart the PC to see if it works.
Please right click the windows —setting -troubleshooting —other toubleshooters— internet—run , let the PC diagnose the problem and solve it automatically.
Go to device manager , click the property of the Intel WiFi driver —advanced–choose property 802 ax, value also choose 802 ax.
5.Please right click the windows–computer management–double click Services–①Wlan auto config–start the service, ②WWAN Auto config —start the service.
6.Please go to the windows terminal (admin) > type in : sfc /scannow > then wait until finished.
Right click windows –go to settings—network & internet—-Advanced network settings–network reset–reset now

NEOFLECT

Beelink CS-Jane

I tried all of the solutions in your post, in order. Results -

Clearing the CMOS - did not work
Uninstalling wifi driver - did not work
Running internet troubleshooter - partially fixes the problem. Connection returned upon restart at regular strength, ran “normally” (with the signal intermittently weakening/dropping) for about an hour, then the connection dropped entirely again.
Value 802.11ax - brought internet connection back for a moment, then it quickly dropped again.
WLAN auto-config - already running. Starting WWAN auto config did not fix the issue.
sfc /scannow - Verification 100% complete. Windows resource protection did not find any integrity violations. Still no internet connection
Network reset - already tried this, doing it again after trying everything else on the list still does not resolve the issue.

After trying everything in your post the best I’m getting is, maybe, a few minutes at a time online before I lose connection again. Would love a more permanent solution to this problem!

Beelink CS-Jane

NEOFLECT Hi there,thanks for your updates.
Could you please try to unplug and reinsert the network card?
You could refer to:https://url.bee-link.cn/5Xhe

Vasy

Hi 👋

II just got a new PC, a Beelink GTi14 Ultra, but I’m having a problem with the Wi-Fi. It’s not running at its full capacity.

On my phone and my older PC, I get download speeds of up to 90 MB/s, but on this one I’m only getting around 33 MB/s. 😕

I recently had a Beelink SER8, which had exactly the same problem, so I sent it back and bought this newer model with a newer Wi-Fi chip. Unfortunately, I’m having i got all the updates with intel solutions