SER5 Pro need wifi driver

isidrosan

SN:C58006GG50444
SER5 PRO-E-16500EJ0W64PRO-DP/XB

Beelink CS-June

isidrosan

Hello there,

Here is the driver file you need: https://url.bee-link.cn/SzSO

Here is the tutorial: https://buildin.ai/lizong/share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

Have a nice day~

felixandrea

Thanks for providing the driver and tutorial. Does the tutorial also cover what to check if the Wi-Fi adapter still isn’t detected after installing the driver? In particular, should we remove the existing Wi-Fi driver first or check Device Manager for a specific hardware ID before reinstalling it? https://buildin.ai/lizong/heardle /share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

Beelink CS-June

felixandrea

Hello there,

According to the tutorial I provided, you should first try to uninstall the driver, and then update the driver file we have provided.

Here are the methods to try if the WiFi issue still persists even after reinstalling the drivers:

1.Please clear the CMOS. Please turn off the PC , unplug the power supply, and put the pin in the pinhole and press it for about 10 seconds , restart the PC after ten minutes.
Here is the tutorial [https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms]

Make sure that the distance between the PC and the router is less than 6 meters.
Go to device manager , click the property of the Intel WiFi driver —advanced–choose property 802 ax, value also choose 802 ax.
Please make sure your WIFI signal is full.

5.Please right click the windows–computer management–double click Services–①Wlan auto config–start the service, ②WWAN Auto config —start the service.

6.Please go to the windows terminal (admin) > type in : sfc /scannow > then wait until finished.

7.Please try this software [https://mega.nz/file/X7hGVZwb#1tA5wEJhxH8BDtKxeB5qS2ZiIEUByAVZoOnzhSf4-Pg] or [https://url.bee-link.cn/meE5]

Right click windows –go to settings—network & internet—-Advanced network settings–network reset–reset now

Have a nice day~