GTi15 Ultra WoWLAN

VictorVZ

Hello.
Is there a way to enable WoWLAN on GTi15 Ultra? I see that it is already enabled on Device Manager but doesn’t seem to be working.

The BE200 is configured with WakeOnMagicPacket enabled and appears in wake_programmable/wake_armed. I also confirmed with Wireshark that the Magic Packet arrives during S0 Modern Standby: I sent it several minutes after entering sleep, waited several more minutes without interacting with the PC, then woke the PC using a USB keyboard. The packet’s Arrival Time corresponds to the time it was sent, not the time the PC was manually awakened. However, the Magic Packet does not wake the system.

Also WoLAN doesn’t seem to be available:

I see no WoWLAN or WoLAN options in BIOS, I have version T203.

Beelink CS-Yvette

Hi there,

GTi15 with NIC E610 doesn’t support WOL.This is official Intel hardware limitation, not driver / BIOS bug

VictorVZ

Beelink CS-Yvette
Thank you for clarifying that the E610 does not support WOL on the GTi15.

I have one additional question regarding the integrated Intel Wi-Fi 7 BE200:

Does the GTi15 Ultra officially support Wake-on-Wireless-LAN (WoWLAN) from Modern Standby (S0/S0ix)?

On my system:

Intel BE200 is installed and working normally.
Wake on Magic Packet: Enabled
Wake on Pattern Match: Enabled
ARP/NS/GTK offload: Enabled
The BE200 appears in powercfg /devicequery wake_programmable.
The BE200 is armed as a wake device.
I tested a Magic Packet while the PC was in Modern Standby.
Wireshark shows that the Magic Packet actually arrived during the sleep period. I sent the packet several minutes after entering sleep, waited several more minutes without interacting with the PC, and then manually woke the PC using a USB keyboard. The packet’s Arrival Time corresponds to the time when I sent it, not when the PC was manually awakened.
However, the Magic Packet did not wake the PC.

Could you please confirm whether WoWLAN from S0/S0ix is officially supported on the GTi15 Ultra with the BE200?

If it is supported, is there a specific BIOS setting, BIOS version, or driver version required?

Thank you.

Beelink CS-Lynn

VictorVZ
①Please go to BIOS: Advanced → ACPI Configuration → Wake on LAN/Wirelan = Enabled; Power → ErP Ready = Disabled (enabling ErP cuts off auxiliary power to the network card during S0ix); Power → Deep Sleep = Disabled; Chipset → Wake on WLAN in Modern Standby (this setting is present on some batches; ignore if not available).
②You can refer to our tutorial to update the BIOS.
Here is the BIOS link: https://url.bee-link.cn/sase
Here is the tutorial: https://url.bee-link.cn/hUf6

If the WOL function still cannot be enabled after performing the steps above, the feature may not be supported.
Please give it a try first and let us know the outcome. If it still doesn’t work, we will consult our R&D team.

VictorVZ

Beelink CS-Lynn
I updated the GTi15 Ultra BIOS from T203 to T205 and installed the latest Intel BE200 Wi-Fi driver.

After sending the magic packet, the system remains asleep and does not wake. I can only wake it manually with the USB keyboard.

BIOS T205 does not contain ACPI Configuration, Wake on LAN/WireLAN, ErP Ready, Deep Sleep, or Wake on WLAN in Modern Standby options mentioned in your previous reply.

Beelink CS-Lynn

VictorVZ We have referred your issue to our technical team, and I will let you know once we receive a response from them.

Beelink CS-Lynn

VictorVZ We have confirmed with the technical staff again that the WOL function is not supported.