Wong Hi i have setup everything as shown in picture but the red led on the graphic card turn on not not working. I have also change the peic speed to gen 4 in the bios. My pc only run on igpu.
Beelink CS-Sylvia Wong Hello, a red light on the graphics card indicates a power supply issue. Please check that the power cables are connected properly. Also, what is the model of your graphics card?
Wong I am using RTX5070Ti Asus prime connected to the dock with a 2×8 to 16 adapter cable. The same setup works with RTX5070, am I right to say the cable setup is fine? Could be another issue.
Beelink CS-Sylvia Wong Hi. May I check whether the original adapter cable that came with your Asus Prime RTX5070Ti is a 2×8 to 16pin or a 3×8 to 16pin cable?
Wong Beelink CS-Sylvia The original adapter that comes with the asus prime is 3×8 to 16 but the dock only has 2×8.
Beelink CS-Sylvia Wong Hello, If so, you must use a 3×8‑pin to 16‑pin power cable, not a 2×8‑pin to 16‑pin adapter. Our docking station only has two 8‑pin ports available. To work with your ASUS Prime original PSU, you will need to purchase a 1‑to‑2 splitter cable. You may refer to this Amazon product for reference: https://www.amazon.ca/YEZriler-Adapter-Sleeved-Seasonic-Modular/dp/B09MTHKMD2
