So I can’t get faster than 2x and about 3.5gb/s.
I’ve changed the PCIe to Gen4, turned ASPM off. I’ve reseated my minipc and the GPU in the dock. I power the dock on first. The light by the button comes on but the card doesn’t light up or spin the fans until the beelink unit is powered on.
What am I missing here? I can run fine for most of my workflow, running Qwen 27B fully on the card, same with Gemma 4 26B and Qwen3.6 A3B at incredible speeds but if I want to offload anything like Qwen Next, I am super limited with only 3.5gb/s. I specifically bought this set up for testing large offloaded models and without the PCIe x8 it’s impractical Any ideas what’s happening here? Specs below.
Hardware
- Mini PC: Beelink GTi13 (i9-13900HK), board AZW / GTi
- BIOS: GTiT102, dated 04/21/2025 (AMI Aptio, release 5.27)
- Dock: EX Pro
- GPU: AMD Radeon RX 7900 XTX (Navi 31)
- RAM: 2×32 GB DDR5-5200, dual channel
- OS: Ubuntu 26.04.1, kernel 7.0.0-38
Problem
The host root port (00:01.0) reports max width x8, but the link to the dock
trains at 16 GT/s x2. Read from sysfs current_link_width, and confirmed by a
GPU transfer test: about 3.2 GB/s host to device, which matches Gen4 ×2. A
healthy x8 should be 12-14 GB/s. The dock spec says Gen4 ×8.