RogPodge My Ser 8 pc stopped working. I reformatted the hard drive and tried installing windows 11 from a USB, but the pc just keeps going back to BIOS. Any ideas? I’m in the Puyallup area in case any of you are local.
Beelink CS-Sylvia RogPodge Hi , Please follow these steps to troubleshoot the issue where the PC keeps returning to BIOS when installing Windows 11 from USB: Disable Fast Boot: Enter BIOS → Boot → Set Fast Boot to Disabled. If this remains enabled, you may not have enough time to press Del/F7 on boot. Use a wired keyboard plugged into the rear USB port of the mini PC. Wireless keyboards, front panel ports and docking stations often fail to be recognized during boot. Disable Secure Boot: Go to BIOS → Security → Secure Boot → Disabled. You may re-enable it after Windows installation finishes. Recreate your Windows installation USB drive: Use official Microsoft ISO file with Rufus, select GPT + UEFI (do NOT use CSM/Legacy), file system FAT32. Use a USB drive 16GB or larger, plug it directly into the mini PC (avoid USB enclosures or external SSDs). Incorrect USB creation is the most common reason the USB does not show up in the UEFI boot list and the machine loops back to BIOS. Continuously press F7 during startup to open the boot menu, then select the USB entry with the UEFI prefix. If no such option appears in the menu, your USB drive was not created correctly and needs to be remade. If it still boots back to BIOS: Go to BIOS → Save & Exit → Boot Override, then directly pick the UEFI USB option to bypass normal boot order. When you reach the partition screen during Windows setup, delete all existing partitions on the SSD. Let the installer automatically create EFI and system partitions; do not manually create partitions. After Windows installation completes, go back into BIOS and re-enable Secure Boot, then install the corresponding drivers for your SER8 model from Beelink official website. If all the above steps are done, and the USB can boot normally on another computer but this mini PC still returns to BIOS: Enter BIOS Main page and check whether the M.2 SSD is detected. If the SSD cannot be detected, power off and re-seat the SSD. Also check if the BIOS date/time has reset to default, which indicates a dead CMOS battery that needs replacement.