[BIOS Bug Report] Beelink SER9 (SER9T409): Missing AMDI0105 ACPI device breaks AMD Ryzen AI NPU power/utilization/clock telemetry
System & Firmware Information
Product / Board Name: Beelink SER9 (AZW SER9, SKU 75)
Processor: AMD Ryzen AI 9 HX 370 w/ Radeon 890M (Strix Point, Root Complex PCI ID 1022:1507)
NPU Hardware: AMD Strix/Krackan/Strix Halo Neural Processing Unit (PCI ID 1022:17f0 rev 10, NPU FW 1.1.2.64)
BIOS Vendor: American Megatrends International, LLC. (AMI Aptio V, Release 5.35)
BIOS Version / Date: SER9T409 (06/23/2026)
Operating System: Linux Kernel 7.2.x (x86_64) with mainline amdxdna and amd-pmf drivers
Serial Number: 
Summary of the Issue
In BIOS SER9T409, Beelink added the AMDI0104 (_SB.MP1) ACPI device for the AMD Hardware Feedback Interface (amd_hfi), which works as expected. However, the AMD Platform Management Framework (AMDI0105) ACPI device node is still missing (or disabled) in the ACPI tables (DSDT / SSDT).
On AMD Strix Point (PCI 1022:1507), the mainline Linux NPU accelerator driver (drivers/accel/amdxdna) relies on the amd-pmf driver (drivers/platform/x86/amd/pmf) via amd_pmf_get_npu_data() to query the SMU (MP1 / PMFW) metrics table (METRICS_TABLE_ID = 7) for:
Per-column NPU utilization (npu_busy[0..7])
Real-time NPU power draw (npu_power)
Real-time NPU clock frequencies (npuclk_freq / mpnpuclk_freq) and current TOPS
Because the BIOS does not expose an AMDI0105 ACPI device in /sys/bus/acpi/devices/, the amd-pmf driver never probes (pmf_device == NULL), causing amd_pmf_get_npu_data() to fail with -ENODEV (errno = 19, No such device).
Observed vs. Expected Behavior
Observed Behavior (Stock SER9T409 BIOS)
- /sys/bus/acpi/devices/ has no AMDI0105 device, and /sys/bus/platform/drivers/amd-pmf/ has no bound device.
- Querying DRM_IOCTL_AMDXDNA_GET_INFO with DRM_AMDXDNA_QUERY_SENSORS on /dev/accel/accel0 (used by xrt-smi and system monitoring tools) fails with:
DRM_AMDXDNA_QUERY_SENSORS failed: No such device (errno=19)
- Querying DRM_AMDXDNA_QUERY_CLOCK_METADATA and DRM_AMDXDNA_QUERY_RESOURCE_INFO returns static maximum values even when the NPU is completely idle in D0/D3:
Resource Info: clk_max=1800 tops_max=58 task_max=16 tops_curr=58 task_curr=0
Clock Metadata: mp_npu_clock='MP-NPU Clock' 1267 MHz, h_clock='H Clock' 1800 MHz
Expected Behavior (Verified via Live SSDT Injection of AMDI0105)
Injecting a minimal 71-byte SSDT at runtime via acpi_configfs that adds AMDI0105:
DefinitionBlock ("", "SSDT", 2, "AZW", "AMDPMF", 0x00000001)
{
Scope (\_SB)
{
Device (PMF0)
{
Name (_HID, "AMDI0105")
Name (_UID, Zero)
}
}
}
immediately causes amd-pmf to bind to AMDI0105:00, initialize the SMU metrics table over SMN (0×13b102e8 / 0×13b102ec), and return live SMU NPU metrics without any hardware or firmware errors:
/sys/bus/platform/drivers/amd-pmf/AMDI0105:00 -> ../../../../devices/platform/AMDI0105:00
Sensors (buffer_size=1512, count=9):
[0] label='Total Power' type=0 input=1 max=0 avg=0 highest=0 units='mW' unitm=-3
[1] label='Column 0 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[2] label='Column 1 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[3] label='Column 2 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[4] label='Column 3 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[5] label='Column 4 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[6] label='Column 5 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[7] label='Column 6 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
[8] label='Column 7 Utilization' type=1 input=0 max=0 avg=0 highest=0 units='%' unitm=0
Resource Info: clk_max=1800 tops_max=58 task_max=16 tops_curr=2 task_curr=0
Clock Metadata: mp_npu_clock='MP-NPU Clock' 42 MHz, h_clock='H Clock' 84 MHz
Requested BIOS Fix
Please enable the AMD PMF ACPI device (HID “AMDI0105”, matching AMD AGESA / CBS Strix Point PMF configuration) in the next Beelink SER9 BIOS release (or expose a toggle for AMD PMF in the BIOS setup menu, enabled by default), just as AMDI0104 (_SB.MP1_) was enabled in SER9T409.
Thank you!