I am a proud new owner of a SER10 MAX (Ryzen AI 9 HX 470), but I want to share a crazy troubleshooting experience, i love the performance of this machine.
BUT
Out of the box, my Wi-Fi was completely crippled. I was getting around 5-10 Mbps with huge latency spikes, while my smartphone in the exact same spot was getting a stable 40+ Mbps.
I went crazy trying to isolate the issue. I thought it was a software/hardware defect:
- Tested with a Linux Live USB to rule out Windows 11 drivers (still 5 Mbps).
- Flashed the BIOS to SERM1.V105 as suggested by support (no change).
- Opened the case, found out they shipped it with an older AX200 module instead of the advertised AX210 (i’ve arleady alerted support on this).
- Actually i tried to replace the AX200 with the one that my dad has with his SER10 device. The speed barely improved by a few megabits, but in the end nothing changed.
- Then i tried to use a usb c monitor and went near the router wifi thinking it was just a wifi issue. Indeed the connection was stable and the 41Mbps popped out of the speedtest.
- Switched back to my monitor and then the problem came back!
Prompting and searching some with some various llms, I found a point, the display port cable could be the problem of the connection issues.
The DisplayPort port on the back of the SER10 MAX is located millimeters away from the internal Wi-Fi antennas. A high-bandwidth DP cable generates massive EMI (Electromagnetic Interference). Combined with the aluminum chassis acting as a Faraday cage, the DP cable was acting like a literal radio jammer, completely destroying the Signal-to-Noise Ratio (SNR) of the Wi-Fi card.
So i switched to the provided hdmi cable of the minipc, and guess what? 41 Mbps and stable ping.