beedadd
Hello there,
Regarding the machine issues you reported, this is usually because the EDID (Display Information) has not been correctly read, or the display mode has locked the resolution, and it does not indicate that the HDMI or DP port of this machine is broken. The native port and the USB-C adapter use two different display output paths, so the performance will be different.
Here are the test solutions you can try:
- Check the display mode: Go to Settings → System → Display → Multiple Displays, and change it to “Display only on 1” or “Extend”. If it is selected as “Copy”, Windows will lock the resolution at the value supported by both sides, and the resolution option will naturally become grayed out.
- Confirm if the display has been correctly recognized: Check the device name in the display settings. If it shows as “Generic Non-PnP Monitor”, it means the EDID has not been read. At this time, connect the monitor directly with a shorter, certified HDMI 2.0 cable without any intermediate adapters or splitters.
- In AMD Adrenalin, set the display zoom mode to “Full Panel”, and check if “Custom Resolution” is disabled; if the native port option is grayed out and the USB-C path is normal, it indicates that the problem lies in the link identification of this output port.
- Try each of the HDMI and DP ports of the display separately, and also change the cable. Confirm if the problem follows the interface; if changing the cable and the display results in the native port still outputting a fixed resolution, it belongs to a hardware problem of the interface or the HDMI conversion chip.
Have a nice day~