Hi Beelink team,
My GTR5 (Ryzen 9 5900HX, 2×16 GB Crucial DDR4-3200) hangs on every restart after I save any BIOS change.
- BIOS: GTR_V1.24_bLink_P4C5M43 (AMI Aptio 2.21.1277, dated 06/07/2022)
- OS: Windows 11 Pro. It runs fine on factory BIOS settings.
What happens: I change a setting, press F4 (Save & Exit), and on restart the fan goes to full speed with no display, no POST, no BIOS screen and a dead Caps Lock light. Only clearing the CMOS (front pinhole, power unplugged) brings it back.
Tested on 2026-11-08, it failed all 3 times:
1) Security > Restore Factory Keys > Secure Boot Enabled > F4.
2) Advanced > AMD CBS > NBIO Common Options > GFX Configuration > iGPU Configuration UMA_SPECIFIED, UMA Frame buffer Size 4G > F4.
3) The same UMA change again, then waited 16 minutes in case of memory training. Still no display.
After each CMOS clear it boots normally into Windows, with all RAM and drives present.
Questions:
1) Is there a newer BIOS for the GTR5 (5900HX) that fixes saving settings? If so, please send the file and the exact flashing instructions.
2) Is this a known fault? Is there anything I can check before flashing?
3) If I flash and it fails, what’s the recovery procedure?
Thanks!