DaveVigs
Hello there,
Regarding the two parts you inquired about, the size of the screws required for each is M2D4.5T0.8*L4.
If you need to purchase the corresponding screws and thermal paste, you can contact our email - support-pc@bee-link.com
Selection of heat conducting medium: If the heat sink and the metal plate are directly pressed together as two metal planes, conductive silicone grease should be used instead of conductive pads. Silicone grease is used to fill the tiny gaps on the metal surfaces, resulting in lower thermal resistance; conductive pads are suitable for situations with obvious gaps that require buffering, such as the structure between SSD and the metal plate.
Only when it is confirmed that there is a practical gap of 0.5mm or more at this location should the use of conductive pads be considered; and a model with a thickness matching the gap and a thermal conductivity of 6 W/mK should be selected. Using a thicker pad may cause overheating due to poor pressing.
Cleaning old silicone grease: Wipe both sides with a lint-free cloth dipped in 90% or more isopropyl alcohol. Do not use a blade or sandpaper to scrape. Apply a thin and even layer of new silicone grease.
Have a nice day~