SER7 High Ram Temperature Issue

Vinn

Hi, is there a way to increase the fan speed in response to high ram temperature?

I was running computation intensive workloads on my SER7 and it blue screened a few times.

I suspected that it was due to high temperature and so I reran the computation and observed the temperature using HWMonitor. The cpu was running at 70+ degrees but the ram was running hot at 105 degrees. Even so, the fan wasn’t at full speed.

Is there a way to increase the fan speed (through the bios?) in response to high ram temperature?

support10

Hello Vinn，

Don’t worry, the PC has one-year warranty.
Please send us a picture of SN on the bottom of the PC .

(1)Please change the fan speed, here is the tutorial https://buildin.ai/lizong/5bb71253-637f-49c1-a958-74a05e49d2f2

(2)Here are some potential solutions:

①Check the cooling system: Ensure that the fans inside the PC are functioning properly. Make sure they are spinning freely and not obstructed. If the fan is not spinning , it need to be replaced.

②Adjust power settings: Adjust the power settings on your PC to optimize performance and reduce heat generation. Lowering the maximum processor state or using power-saving modes can help.
Go to control panel —power option—change to High performance— change plan setting—advanced setting —processor power management— change both 100% to 99% , click save.

③Update your BIOS. Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the main page, we will check if you need to update the BIOS.

Have a nice day!

Vinn

Thanks for the tips! I’m gonna try updating the bios and changing up the fan speed for a start. I have already emailed beelink tech support on the BIOS update so I won’t be posting it here.

Btw I tried adjusting the processor power to 99% but it somehow made things worse. The fan goes into low-speed mode which I suspect is due to the cooler cpu but the RAM remains really hot.