Here is the GTR Series driver / BIOS source https://dr.bee-link.cn/?dir=uploads%2FGTR

When updating the BIOS on my GTR-3550, I copied the system files to a USB memory stick and booted it. After that, when I type “fs3”, an error message appears as shown in the image, and I can’t proceed. The same error message appears when I type “fs0”, “fs1”, or “fs2”. What could be wrong?

PECO Hi there, you need to add colon after FS3

Beelink CS-George Thank you for your reply. I apologize for my lack of knowledge. I will try that when I update the BIOS.

PECO You are welcome. Any questions, please do let us know.

Cannot reach the link above… broken or blocked? Looking for drivers and BIOS for GR7 and GTR-7 Pro. Please HELP! Why would Beelink REMOVE them? They are completely GONE from their web site!

dachshund.digital Hi there ,please try this link https://dr.bee-link.cn/?dir=uploads%2FGTR%2FGTR%207840%20GTR%207940

Downloading drivers, ugh, the bane of my digital existence! Is it ever a smooth process? Finding the right BIOS version feels like deciphering ancient hieroglyphics sometimes. GTR Series, huh? Hope their download page isn’t a labyrinth. Seriously, updating drivers shouldn’t require a PhD. One time, I bricked my graphics card trying to update BIOS and had to, uh, let’s say, creatively troubleshoot it. It was a real [Slope Game]of survival, figuring out the fix! Talk about stressful.

Hi there ,please try this link Friday Night Funkin https://dr.bee-link.cn/?dir=uploads%2FGTR%2FGTR%207840%20GTR%207940 Beelink CS-George thank share!

GTR9 Pro AMD Ryzen AI Max+ 395 I had to install Windows from scratch, and there is no way it will recognise the network card and the cable I have connected to it. It worked when it came from the factory, but after installing Windows and using the driver from Download Center, it only works with WiFi. Is there another driver for the network card (not for WiFi)?

LEPT I have the same issue. After reinstalling Windows 11 and installing the original Intel E610-XT2 adapters, the network cards were working perfectly. Then I installed the Mediatek drivers, and after the next reboot, the Intel cards were no longer available. In Device Manager, they now appear under hidden devices. What can I do to reactivate them?

GTR Series Driver/BIOS download

J-DUB

I managed to flash the bios update. Seemed to go ok. Now I’m just getting a black screen.

Is there a AMI BIOS recovery option using a renamed BIOS file (AMIBOOT.ROM)??

Beelink CS-Ian Chan

J-DUB
Hi , There
Sorry for the matter .
May I know if the PC right now is completely off ?
It might have bricked it somehow.
Please email us for further assistance with purchase record and SN code picture.
PC after-sales service support:
Support-PC@bee-link.com

bluebaron11

Beelink CS-Ian Chan
I upgraded successfully to GTRPRO7 but the processor microcode is still at 0×0b70001e. Do you have a BIOS with the updated microcode?

Beelink CS-Ian Chan

bluebaron11
Hi , There
We do .
Please send us a picture of SN number and BIOS version .
We will check if it needs to update.
Here`s how to check your BIOS version:
https://mega.nz/#F!yuISGa4I!s1bQQajKwnsEdzjqq4nopQ

bluebaron11

I used the linux commands instead. Here are the details: sudo dmidecode -s bios-version
[sudo: authenticate] Password:
GTRPR07
sudo dmidecode -s system-serial-number
C395H6EG10021

Beelink CS-Ian Chan

bluebaron11
Hi , There
Please send us a picture of SN on the bottom to confirm.
Thanks for your patience and your understanding.

bluebaron11

Beelink CS-Ian Chan

bluebaron11
Hi , There
I have sent the BIOS via PM .

bluebaron11

Beelink CS-Ian Chan Thanks…that fixed it!!

Roberto_Arriaga

Hi:

I have the GTR 395 with the “original” NIC, last update was GTRP110_WinFlash.zip and was wondering which BIOS update is next. Here is system information

Thanks and best regards.

EAR

After running 2 GTR9 Pro with Ubuntu 24.04 with Open-WebUI, Ollama, LiteLLM and ComfyUI, I decided to buy 2 more and do clustering to run a MoE. Now I am finding out these units have NIC issues and it will definitely crash since I plan on bonding (LACP) both 10GbE and connecting them to a managed 10GbE switch with LACP as well.

What is Beelink offering??? Can we send these older units back and get the newer NIC ver 2.2 units?

My 3rd unit is at GTRPR07 (newer NIC ver 2.2) and there is a FW update already, GTR9-Version2-GTRPRPI1001C_Note-secure-boot-update-AMD-AGESA-only-GTRPR0X-can-flash, but not sure if I really need it? Anybody tested this FW yet?

EAR

EAR After running 2 GTR9 Pro with Ubuntu 24.04 with Open-WebUI, Ollama, LiteLLM and ComfyUI, I decided to buy 2 more and do clustering to run a MoE. Now I am finding out these units have NIC issues and it will definitely crash since I plan on bonding (LACP) both 10GbE and connecting them to a managed 10GbE switch with LACP as well.

What is Beelink offering??? Can we send these older units back and get the newer NIC ver 2.2 units?

My 3rd unit is at GTRPR07 (newer NIC ver 2.2) and there is a FW update already, GTR9-Version2-GTRPRPI1001C_Note-secure-boot-update-AMD-AGESA-only-GTRPR0X-can-flash, but not sure if I really need it? Anybody tested this FW yet?

EAR

Also, there is a newer FW for the ver 1 NIC , GTR9-Version-GTRP112_-Note-Solve-RDSEED-issue-only-GTRP1XX-can-flash, Any reports of this FW upgrade working? Im very skeptical running these FW, considering they are coming from an “upload” folder??? Reports of bricking also is not a good flag…. Support is across the globe from here the US. Only if I had researched this better….

EAR

EAR Also, there is a newer FW for the ver 1 NIC , GTR9-Version-GTRP112_-Note-Solve-RDSEED-issue-only-GTRP1XX-can-flash, Any reports of this FW upgrade working? Im very skeptical running these FW, considering they are coming from an “upload” folder??? Reports of bricking also is not a good flag…. Support is across the globe from here the US. Only if I had researched this better….

bluebaron11

I’m running GTRPRPI1001C with Ubuntu 26.04 and not seeing any issues.

EAR

bluebaron11

Thanks for the heads-up.

@ Beelink-CS
WELL???? Why am I being ignored by Beelink CS???

Anteng

Beelink CS-George

I need urgent assistance with my Beelink SER8 (Ryzen 7 8845HS).

Serial Number: Y88454JH50035

Issue: After flashing BIOS V035 P8C0M0C15.14 (downloaded from your official link https://url.bee-link.cn/7pUy) using AFUWINGUIx64.EXE, the flash completed successfully (all blocks verified green, Stage: Done). After restarting, the unit powers on (white LED) but there is NO video output on any port - HDMI 1, HDMI 2, and DisplayPort all show no signal.

Steps already attempted:

CMOS reset via pinhole
Tried multiple monitors and cables
Tried Ctrl+Home recovery boot with AMIBOOT.ROM on FAT32 USB
Tried F7 boot menu blind (no display)
My work files are on this machine and I need it recovered urgently. Please advise on next step

Beelink CS-Ian Chan

Anteng
HI, there
It might brick it somehow.
Please email us for further assistance with purchase record and SN code picture.
PC after-sales service support:
Support-PC@bee-link.com

« Previous Page