Here is GTi Series driver and BIOS download source https://dr.bee-link.cn/?dir=uploads%2FGTI

Dear Bee-Link Support, I recently purchased a Bee-Link GTi14 with the following specifications: 2TB hard drive, 96GB RAM, and an EX-Docking station for an external graphics card (Nvidia GTX 5070). After assembling everything, I powered on the computer with the preinstalled Windows 11 Pro. Since I prefer a clean installation, I formatted the drive and installed my own version of Windows 11. To my surprise, after installation the system could not detect any Wi-Fi networks, and connecting an RJ-45 cable did not enable wired internet either. Using the SHIFT + F10 command and running oobe\bypassnro, I was able to complete the installation, but I noticed that Windows did not recognize many drivers. I searched for help on the Bee-Link forum and found a driver package from what seemed to be official support. I successfully installed most of the drivers, but some of them still fail to install. Most importantly, I cannot install the network drivers, which means I still cannot fully use my new computer. I also found a link to download the official Windows 11 image for the GTi14 (usually hosted on Mega.nz). Unfortunately, the image is over 12GB, and Mega’s free account only allows 5GB downloads before forcing a 6-hour wait. In my case, the process took a total of 24 hours, and in the end the download failed as the speed dropped to 0kb/s. Because of this, I had no choice but to pay for a Mega.nz subscription just to download the file: GTi14_OS_24H2_Win11_PRO_BE200_8_USER_2024070801.rar However, after extracting it, I discovered that several key files were missing, making it impossible to create a bootable USB drive via the boot manager. The instructions provided were also unclear and not user-friendly. I strongly recommend that Bee-Link stop hosting critical system files on Mega.nz and instead use free and reliable alternatives, such as Google Drive, OneDrive, or similar services. This would save customers from unnecessary costs and frustration. At this point, trying to set up the GTi14 feels like going back to the Windows 95/98 era, hunting for drivers manually—something I did not expect in 2025. Had I known in advance about these issues with drivers and OS installation, I would have reconsidered purchasing this device. Could you please provide me with: A complete and working driver package (especially network drivers). A proper and verified Windows 11 Pro system image for the GTi14, with clear instructions on how to create a bootable installation USB. Clarification on whether the installation issues might be caused by having the EX-Docking station connected during the Windows installation, and if the computer should be disconnected from it when installing the OS. Thank you for your assistance.

ngne Hi there,please send us a picture of SN on the bottom of the PC. Thanks for the detailed informations and we are sorry about the inconvenience. Here is the driver for GTi14: https://url.bee-link.cn/qwOm Here is the image: https://url.bee-link.cn/N4Ao Here is the picture tutorial https://mega.nz/file/KjZHyIqB#0EEVnG_1fWYCq_qL7GUYFGuD7nKqlV8FZWu78SVGXS4 You could also try to clear CMOS:First,please unplug the power supply and HDMI cable. Please press the pinhole of “CLR CMOS” with a pin for about 10 seconds.Ten minutes later, plug the power supply and HDMI cable, turn on the PC again. May I know did you connect the docking station last time?

Beelink CS-Jane Dear Support, The links you provided are partially correct, but they do not solve the issue with the network card. The illustrated tutorial is also incorrect, because according to it, several files should be present, yet they are missing in the provided system image. In the meantime, I managed to resolve the problem myself and I now know what the issue was. The driver packages you provide are too outdated, and the GTi14 cannot find the proper driver for the network card. According to the hardware specifications, you used a network card with the Intel Ethernet Controller I226-V. It was enough to simply download the latest drivers from Intel’s website. After installation, the card immediately started working properly. Once I had internet access, Windows quickly found and installed all the other latest drivers.

ngne Hi there,thanks for the updates.About the tutorial,it is for referrence and the system files are normal. We will pass on the matter of the driver to the relevant personnel. We appreciate you sharing your experience with us and others on the forum who may have the same problem.

Beelink CS-Jane Hi there,please send us a picture of SN on the bottom of the PC. Thanks for the detailed informations and we are sorry about the inconvenience. Here is the driver for GTi14: https://url.bee-link.cn/qwOm Here is the image: drift boss https://url.bee-link.cn/N4Ao Here is the picture tutorial https://mega.nz/file/KjZHyIqB#0EEVnG_1fWYCq_qL7GUYFGuD7nKqlV8FZWu78SVGXS4 You could also try to clear CMOS:First,please unplug the power supply and HDMI cable. Please press the pinhole of “CLR CMOS” with a pin for about 10 seconds.Ten minutes later, plug the power supply and HDMI cable, turn on the PC again. May I know did you connect the docking station last time? Hey, thanks for sending all the info through. I’ll make sure to grab that SN picture from the bottom of the PC and send it your way. As for the driver and tutorial links, I appreciate it—super helpful! I’ll give the CMOS reset a shot as well, sounds like a good step to take. About the docking station—yeah, I did connect it last time. No issues there, but I’ll check it again just to be sure! Appreciate the support, and no worries about the inconvenience, it’s all part of the process. Let me know if there’s anything else you need from my end.

Gwendolyn Mueller Hi there,may I know the specific issue of your machine?

I have a Beelink GTi14, and after a recent Windows update, my Kinect v2 stopped working. In Device Manager, I now see a Generic SuperSpeed USB Hub with a yellow warning sign. The Kinect requires a stable Intel USB 3.x driver, and it appears that Windows has replaced my Intel driver with Microsoft’s generic one. I already downloaded the official GTi14 Driver Pack (2024-07-10) from the forum. However, I couldn’t find a folder specifically labeled ‘USB’ inside the package. Could you please confirm: Which folder in the GTi14 driver bundle contains the USB 3.x hub/host controller driver? What is the correct installation order to make sure the chipset, SerialIO, and USB drivers install properly? Right now I have the following folders: 1_Chipset 2_Intel_CSME 3_SerialIO ETU813.3.6.2.3… etc. My main goal is to get rid of the yellow warning on the Generic SuperSpeed USB Hub so Kinect can work again. Any advice or direct driver link would be greatly appreciated. Thank you!

Bin Bin Hi there,please send us a picture of SN on the bottom of the PC. You could try to update the chipset,if it is still not working,please go to Intel website and download the auto-detect program. https://www.intel.com/content/www/us/en/support/detect.html

Hello, Could you share the drivers for Ubuntu 24 LTS please? This is for GTI 13. Thanks!

ubis Hi there,sorry that we do not have drivers for Linux. You could click the website to download the corresponding drivers: https://kernel.org/

GTi Series Driver and BIOS download

Beelink CS-Jane

jazzcat Hi there,
We’ve send you the corresponding BIOS files,please check your private discussion.

AO1904

can you send the corresponding bios? and also my speakers do not work on my GTI14, do i need a specific driver for the internal speakers?

Beelink CS-Jane

AO1904 Hi there,
We’ve send you the corresponding BIOS files,please check your private discussion.
Regarding the issue of audio,please try the below solutions:

1.Please right click window–click “”setting“—Sound—-more sound setting –click “playback”–right click speaker—properties–controller information —properties—update the driver. You also need to check if the speakers is disabled or not in the playback setting.

Here is alternative to troubleshoot the audio problem. https://thegeekpage.com/fix-this-device-cannot-start-code-10-error-in-sound-devices-on-windows-10/#:~:text=%E2%80%9CThis%20device%20cannot%20start.,driver%20installed%20on%20your%20computer.
Here is the driver for you to update:https://url.bee-link.cn/qwOm
The tutorial:https://buildin.ai/lizong/50c2dee7-dcde-4707-97d8-dc7eac84a4eb
Please turn off the PC , unplug the power supply, and press the CMOS button (or put the pin into the CMOS pinhole and press it ) for about 10 seconds , restart the PC after ten minutes. Here is the tutorial https://mega.nz/file/2nIRGaYI#M2aIM2bkOJshrhE8sK8MNiKopfyHlqyjnn86TypZp2w or https://url.bee-link.cn/5FdW

chamilaR

Hi Beelink Support,

I have a Beelink GTi15 Ultra with Intel Core Ultra 9 285H. The official driver download page at dr.bee-link.cn times out and I cannot download GTi15-Drivers.zip.

Can you please send me a Mega / Google Drive / OneDrive mirror link for:

GTi15-Drivers.zip
Current GTi15 BIOS, if recommended for CSME / stability issues

I can provide the serial number photo from the bottom of the unit and BIOS main page screenshot if needed.

Thank you.
Chamila

Beelink CS-Jane

chamilaR Hi there,
Here is the driver package:https://url.bee-link.cn/Ffnd
or https://mega.nz/file/j6wVESja#cXArcUJtbMsANf6teqp_bC4qbHjj-hLwFMJKzJy8coA(don’t need to login Mega)
For the BIOS updates,please send us a picture of the Main page of BIOS.

chamilaR

Dear Beelink Support Team,

Thank you for sending the driver package. I appreciate your assistance.

I currently own several Beelink products and have generally been very satisfied with them. However, I am experiencing an ongoing issue with the GTi15 where the LAN connection stops working after the system wakes from sleep, or the unit disconnects from the internet after several days of operation.

I have also noticed similar reports from other users, including the following discussion:

www.reddit.com/r/BeelinkOfficial/comments/1om7gux/on_the_gti15_lan_stops_working_after_sleep_issue/

Could you please advise whether there is a permanent or recommended solution for this issue? Specifically:

Is this driver package expected to resolve the LAN disconnect problem?
If the issue continues, is replacing the network adapter an available or recommended option?
Are there any BIOS, firmware, Windows power-management, or hardware-level fixes that Beelink recommends for the GTi15?
Since I rely on these systems for stable remote access, consistent LAN connectivity is very important. I would appreciate your guidance on the best long-term solution.

Thank you again for your support.

Sincerely,
Chamila

chamilaR

Also, could you kindly provide the latest complete driver package for the Beelink GTi14 as well? I have a Beelink GTi14 also where the LAN connection stops working after the system wakes from sleep, or the unit disconnects from the internet.

I have a GTi14 system also, and I would like to make sure it is updated with the correct official Beelink drivers, including LAN/Wi-Fi/Bluetooth, chipset, graphics, and any other recommended system drivers.

Thank you again for your support. I appreciate your help.

TiTi

I have a question about GTi 15ULTRA, there is a new version of the bios GTi15-BIOS-Version4-GTiAT302-Note-Update-code-only-GTiAT30X-can-flash on the bios website. https://dr.bee-link.cn/index.php?dir=uploads%2FGTI%2FGTi15%2FBIOS%2FGTi15-BIOS-Version4-GTiAT302-Note-Update-code-only-GTiAT30X-can-flash. What’s new there, does it solve any problems?? It wouldn’t be a bad idea to at least write a comment about it…Thank you

chamilaR

Hi Beelink team,
Why is my Mini PC disconnecting after a couple of days? Is the Bios OK? See attached. Please provide guidance.

blob:https://outlook.office.com/05cb3b68-6abb-4f08-801f-3eb6ab479c83
blob:https://outlook.office.com/e6e716c1-8c38-4dba-930f-8e86a6d0847f

chamilaR

« Previous Page