Beelink Mini S12 Pro

Scheper

I did a BIOS upgrade (https://dr.bee-link.cn/?dir=uploads%2FEQ%2FMINIS12%2FBIOS%2FMINI-S12-Version2-MINIS13001-Note-original-version-SN-start-with-8B_02419) and booted to the USB. I immediately started to flash blocks (I don’t know how or what). After a couple of minutes it was finished. I turned power completely off and started the S12 again. Entered BIOS and saw that no harddisks (1 NVME and 1 SATA SSD) where found. Restored BIOS default, but still no harddrives. Rebooted again and was greeted by the UEFI Interactive Shell v2.2 with the message “No mapping found”. What happened and how can I restore the visibility of (and boot from) the harddisks?

support1

Scheper Hi there,
please send us a picture of the SN on the bottom of the PC . Does the SN start with 8B.02419 ?

Scheper

Image description

Scheper

Okay, I installed 106 and now everyrthing seems fine!

support1

Scheper Hi there, glad to hear that

Scheper

A follow up question if I may. Is there a way to disable WiFi and Bluetooth in the bios in this version?

support1

Scheper Hi there, sorry, there is no option to disable wifi or BT in the BIOS , but you can disable them in the device manager.

Birk

As someone who is seriously considering switching from my desktop PC to an S12 this post is rather scary. I’ve updated BIOS on my desktop’s ASUS motherboard several times, with no real problems. I know that BIOS versions do get updated over time - so is this a risky procedure for the S12, or can this particular occurrence be classified as a one-time glitch of some sort?

support1

@“Birk”#p13782Hi there, if you follow the instruction and the reminder, you can avoid the wrong BIOS.