Request for Updated Firmware for GT-King-II TV Boxes

sunrandy

Dear Support Team,

I have 6 units of the GT-King-II TV box.
The current firmware version is Beelink006R0 (Android 11), and the System WebView version is 83.0.4103.127.

As this version of System WebView is outdated, I would appreciate it if you could provide a newer firmware that includes an updated System WebView version. Ideally, we are looking for a version between 120 and 135.

Thank you very much for your assistance.

Best regards,
\Randy

Image description

Beelink CS-George

sunrandy Hi Randy,

Sorry, the latest version is Beelink006R0 , we don’t have newer firmware at the moment.

Adren

I need latest firmware for My Gt King. sn: A311D2AG40144. 8G. Could you send link I have looked every where.

Beelink CS-George

Adren
Please provide a complete image of the bottom shell.

Jerzy

Good Day,
Can you please tell me how to update my GT-King II via microSD card?

Jerzy

Image description

Jerzy

Image description

Beelink CS-George

Jerzy
GTKING II 003R0：https://mega.nz/file/amQxUSgT#e0AKEMT3vN5dz70fbvxU0-0NbtNNEaL94OclasPzcbI
here is tool: https://url.bee-link.cn/w367
Tutorial :https://url.bee-link.cn/cIcR

Jerzy

Beelink CS-George Thank you.

I followed the instructions, but #9 in your tutorial never appears; I do not get UBOOT or anything that comes up.

Can you please help? Image description

Beelink CS-George

Jerzy
Thank you for your reply.
Please try this firmware: https://dr.bee-link.cn/index.php?dir=uploads%2FTVBOX%2FGTKINGII%2FGTKINGII_Beelink006R0

Jerzy

Beelink CS-George

Nothing happens.

Maybe I bricked it. How can I fix that? Image description

Beelink CS-George

Jerzy
Thank you for your reply.
To flash the SD card, the device must be able to boot normally.
If it cannot boot normally, try flashing via USB cable.

Jerzy

Beelink CS-George
Please give me instructions; it cannot boot normally, I do not know how to try flashing via USB cable?? The devise is not seen by my TV.

I have been using a male to male USB cable from GT KING II to my computer. My computer regognizes the devise but cannot load via the USB Buring Tool.

I need the GT King II factory USB firmware (.img) that is compatible with Amlogic USB Burning Tool. Please do not send OTA ZIP files — I need the full restore image used for unbricking.

My current firmware file is GTKINGII_Beelink003R0.img, but it is not a true USB image. Please provide the correct factory USB image

Unfortunately, the firmware you provided (GTKING II 003R0) is an OTA update package. It cannot be used with the Amlogic USB Burning Tool, and the device cannot enter USB flash mode with this file.

I specifically need the full factory USB‑flashable firmware image for the GT King II — the complete restore image that includes:
• Bootloader
• DDR init
• Partition table
• Amlogic USB header

Please send the factory USB firmware (.img) used for unbricking the GT King II.
OTA update files will not work for this purpose.

Thank you.

belushi48

need firmware update
sn : A311D2BF10035 Image description