BIOS Losing Configuration

lederhosen

I have enabled the setting in the BIOS of my Mini PC (Beelink Mini S13) for it to power on automatically (“State After G3” - S0 State), but I’ve noticed that it is losing this configuration. I’m not sure of the exact frequency, but when I check the BIOS later, I find it set to S5 State. My Mini PC has been shutting down occasionally, and I’m not sure if it’s due to some Windows power-saving setting, which I’ll look into later. However, since I can remotely turn the power off and on, previously this was enough for it to start automatically. Now, because the BIOS is reverting from S0 to S5 State, it no longer starts unless I do it manually. I’m not sure if updating the BIOS is necessary or if there’s another solution. I will provide the BIOS and Mini PC details.

Image description

Thank you very much for the help.

support1

① Please turn off the PC , unplug the power supply and other USB devices, then put the pin in the CMOS pinhole and press it for about 10 seconds , restart the PC after ten minutes.
Here is the tutorial https://url.bee-link.cn/5FdW

② If it doesn’t work, please update the BIOS , here is the BIOS https://url.bee-link.cn/mAp9 ,here is the tutorial https://url.bee-link.cn/s8yp (From the SN, the PC model is mini S N5095 not mini S13 )