Any ideas how I can get into BIOS? I have tried F7, Delete , esc, nothing seems to work.

    …Right-click a blank area on the desktop and go to New > Shortcut.
    
    In the wizard that opens, click in the box underneath Type the location of the item, and enter the following:
    
    Shutdown /r /fw /t 1
    
    If you’re not familiar with these commands, /r means restart, /fw means boot to firmware (aka the BIOS) and /t introduces a delay in seconds before the restart begins. In our example above, that’s one second.
    
    Call this new shortcut Restart to BIOS. Right-click your new shortcut on the desktop and select Properties. Click the Advanced button.
    
    In the Properties box, tick the Run as administrator box and click on OK a couple of times to close the windows…

    Hello there,

    You can try to clear CMOS first: Please unplug the power supply and HDMI cable. Then press the pinhole of “CLR CMOS” with a pin for about 10 seconds. Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.
    Please wait about one or two minutes, if you can go to the system, Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save.
    Here is a video tutorial: https://mega.nz/file/2nIRGaYI#M2aIM2bkOJshrhE8sK8MNiKopfyHlqyjnn86TypZp2w

    Here are some solutions:
    1、Please take out the RAM ,please clean the contacts of the RAM with a rubber. Here is the tutorial [https://url.bee-link.cn/AzzB] or https://mega.nz/file/7nwDmCaL#UyzSmVkqJG8HW9dhjHhLkkzdP9gt2Br3xyCG1SCdbrA

    2、 Please take out one RAM and leave the other one in it to test if the RAM is defective or not. When testing, please turn on the PC, and wait about one minute, if you can go to the system, Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save.

    Have a nice day!