Me Mini M.2 drives not showing on windows or BIOS

Doug R

i just got a me mini and install 4 M.2 Samsung drives (2 TB) in it, the BIOS does not see them and the i am running ZIMA OS and using it as a nas and that dose not see the M.2 as well

is there something in the BIOS that i am overlooking ??

or is there something else that i need to set up differently

Beelink CS-George

Doug R Hi there, please send us a picture of SN .

Please press delete key as soon as you turn on the PC, so that you can go to BIOS. Please send us a picture of the Main page.
We will check if you need to update the BIOS.

By the way, there might be some compatibility issue if you use more than one Samsung drive. So we suggest you use another brand , like crucial.

Doug R

i will not allow me to send a photo as it is to big

how do i send them ??

Doug R

i only have one m.2 in there now and it still does not see it

i formatted it using another PC running windows 11

Doug R

Image description

Doug R

Image description

Beelink CS-George

① Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. On Save&Exit page, please click Restore defaults, press enter to confirm, then press F4 to save.
②Please update the BIOS from 305 to 307 , here is the BIOS https://url.bee-link.cn/NnmT, here is the tutorial https://url.bee-link.cn/XkAn

Doug R

i downloaded the new BIOS to install and after i restored defaults it now it will not post

Beelink CS-George

Doug R Please turn off the PC , unplug the power supply and other USB devices, then put the pin in the CMOS pinhole and press it for about 10 seconds , restart the PC after ten minutes.
Here is the tutorial https://url.bee-link.cn/5FdW

Can you access to the BIOS ?

Doug R

I tried this and it still will not post

i am re tuning it and have ordered a new one. hoping i will have better luck with this one

👍

Beelink CS-George

Doug R Hi there, OK. Any questions in the future, please do let us know