Like many others, I’m having a problem with the Wi-Fi module on my Beelink SER9 MAX AMD Ryzen™ 7 H 255: it’s extremely slow, reaching speeds of only 5 Mbps 😢 It doesn’t see the 5 GHz network from the router, only 2.4 GHz. My laptop and phone are in the same location, and they see 5 GHz and speeds of up to 150 Mbps. I updated the drivers and removed the Intel® Wi-Fi 6 AX200 160 MHz device, but that didn’t help 🙄

Kjeck Hello there, Sorry for the trouble. Could you please send us a picture of SN code at the bottom of machine ? Here are some potential solutions: 1.Please clear the CMOS. Please turn off the PC , unplug the power supply, and put the pin in the pinhole and press it for about 10 seconds , restart the PC after ten minutes. Here is the tutorial [ https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms ] Make sure that the distance between the PC and the router is less than 6 meters. Please uninstall the wifi driver and then resatart the PC to see if it works. Please right click the windows —setting -troubleshooting —other toubleshooters— internet—run , let the PC diagnose the problem and solve it automatically. Go to device manager , click the property of the Intel WiFi driver —advanced–choose property 802 ax, value also choose 802 ax. Please make sure your WIFI signal is full. 7.Please right click the windows–computer management–double click Services–①Wlan auto config–start the service, ②WWAN Auto config —start the service. 8.Please go to the windows terminal (admin) > type in : sfc /scannow > then wait until finished. 9.Please try this software [ https://mega.nz/file/X7hGVZwb#1tA5wEJhxH8BDtKxeB5qS2ZiIEUByAVZoOnzhSf4-Pg ]or [ https://url.bee-link.cn/meE5 ] Right click windows –go to settings—network & internet—-Advanced network settings–network reset–reset now Please go to device manager, uninstall the WIFI driver, then reinstall the PC. Have a nice day~

There are 2 questions now: How do I activate Windows 11 after reinstalling the OS? Is there an update to the current BIOS version SER9L0101? Please give me a link.

SER9 MAX AMD7 255 slow Wi-Fi

Kjeck

Will clearing CMOS erase data on SSD?!
[ Image description

Beelink CS-Rose

Kjeck

Thanks for your information.Rest assured, clearing the CMOS will not erase the data on the SSD.

Kjeck

Thanks for the recommendations, I’ll write about the results after I complete them.

Kjeck

There are 2 questions now:

How do I activate Windows 11 after reinstalling the OS?
Is there an update to the current BIOS version SER9L0101? Please give me a link.

Beelink CS-June

Kjeck

Hello there,

I have sent you the Windows key, please check your PM.

Your machine’s BIOS version should be the lastest.

Have a nice day~

joezhuu

Hi,

I just received my SER9 with exactly the model today. Having the exact slow WIFI issue. I leave the SER 9 next to the router and the download speed of WIFI is under 10 Mbps while all my other devices are 300Mbps above.

I have followed all steps above, got the speed to 80Mbps now, but still way slower than it should be.

Beelink CS-June

joezhuu

Hello there,

Could you please send us a picture of SN code(two lines) at the bottom of machine ?

Then we can help you better.

Have a nice day~

joezhuu

Image description

Beelink CS-Rose

joezhuu

Please try opening the bottom cover to see if the Wi-Fi speed improves.

We can send you a new network card and antenna to improve Wi-Fi speed. Please contact support-pc@bee-link.com

PeterWater

Kjeck

Beelink CS-June
I completed all the points, it got a little better: I saw the 5G network, but the connection speed was no more than 5 Mbps, the 2.4G network increased the speed to 15 Mbps
But it’s still unacceptable on a 150 Mbps channel ☹

Beelink CS-June

Kjeck

Hello there,

Thanks for your reply~

It is suggested that you try unplugging and plugging in the network card. Here is the tutorial: https://url.bee-link.cn/sF2l

If the WiFi issue still cannot be resolved, please contact our after-sales email to apply for a new WiFi network card to solve the problem. This is the after-sales email address of Beelink: support-pc@bee-link.com

Have a nice day~

Kjeck

Thanks, it didn’t help, I wrote to support-pc@bee-link.com

Is it possible to increase the amount of video memory over 8GB due to RAM? How to do it?

Beelink CS-June

Kjeck

Hello there,

Here is the tutorial of adjusting the VRAM: https://buildin.ai/lizong/share/92191a7b-6397-4bde-b54d-8269a2dce7a7

Have a nice day~

Kjeck

On 12/26/2005, two BIOS versions 1506 and 1507 for SER9-MAX-255 were released, what is the difference?

My version is: SER9L0101 dated 07/16/2025
Sn: B255H5JF20190
Not updated to 1506 or 1507, see screenshot
Image description

Beelink CS-Rose

Kjeck SER9pro255 BIOS versions: 029.P8C0M0C15.07 and T501 are initial versions.

SER9MAX255 original BIOS: V035.P8C0M0C15.06/ Version V035.P8C0M0C15.07 BIOS adds WOL functionality.

Your current BIOS does not need to be updated.