u59 pro n5105 v0.1 wont power up

Liquidnitro90

I have a U59 pro and suddenly it will not boot up or power up. when i plug in the device and press the power button it does not turn on.

I already tried resetting ram, resetting SSD, swapping ram(i make sure that i unplug the device first), putting different ram at a time on each slots and I end up no boot or powering up the device.

i need help

erin77brown

Since you’ve already ruled out RAM and SSD, the issue likely stems from a faulty power adapter or a dead CMOS battery. Try testing with a different 12V power supply or clearing the CMOS by unplugging the unit and removing the internal coin cell battery for 5 minutes empower insurance

Liquidnitro90

I tried other power supply and remove cmos battery, but the motherboard does not power up. I dont know what else I can check. please help

Image description

Beelink CS-George

Liquidnitro90
Please send us a picture of SN on the bottom of the PC.
Please try resetting the CMOS:
First, Please turn off the PC , unplug the power supply, and press the CMOS button (if no CMOS button, please put the pin in the CMOS pinhole and press it ) for about 10 seconds , restart the PC after ten minutes. Here is the tutorial https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms or https://url.bee-link.cn/5FdW

If the issue persists, it may indicate a hardware malfunction. We recommend contacting our after-sales support email: support-pc@bee-link.com