I got a eq12 and formatted the ssd to proxmox. However, after installing proxmox whenever i start/reboot the system it first go into bios and then after exiting the bios it starts proxmox os.

I have tried

  • taking out and putting back the ssd and ram
  • clear the cmos
  • pressing power button without power cable plugged in for 30s

Is it a hardware problem or is there a bios setting that I have to configure?
Also is it possible for me to get the latest version of the bios so that i could try upgrading my bios?

    test Please provide the SN of the machine and a picture of the main page of the BIOS. We will first confirm whether there is a BIOS that can be updated. We will first see if updating the BIOS can solve the problem.

    • test replied to this.

        support11
        here is my SN and bios image.
        thank you for your service
        Image description
        Image description

            test Your BIOS is already up to date. Please try clearing the BIOS to see if it helps:Please try clearing coms first: please unplug the power supply and HDMI cable.Please hit the pinhole of “CLR CMOS” with a pin for about 10 seconds.Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.  This is a video tutorial:https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms

            • test replied to this.

                support11
                Thank you for the reply.
                However, clearing the cmos did not work. It still goes into bios

                    test Are you willing to try using a Windows system? This situation may not occur on a Windows system. I have sent you the system file via PM. You can try to install it. I look forward to your feedback.