- #18
As per others I really wish Beelink would revise its BIOS Update doco. Can you also please provide Release Notes to know what changes have been made.
As per others I really wish Beelink would revise its BIOS Update doco. Can you also please provide Release Notes to know what changes have been made.
Marbles Hi there,
Thanks for your suggestions.
If you are on the download page, you can check the information.
https://dr.bee-link.cn/?dir=uploads%2FGTI%2FGTi14%2FBIOS-EC
I followed the instructions for “anx7406(2024-11-13)_2024-11-14_8-06-32.zip” but it does not load anything it keeps bouncing back to choose boot drive screen. How do I get this to work? In the future all of these update should be available to be completed inside windows instead of bios screen. Most users would not be capable of completing the instructions.
I have gt14i, and get ic 0 active section error 3
IC 0 update error 7.
Can’t you see the picture????
[unknown] Can’t you see the pictıure???????
[unknown] Can’t you see the pictıure???????
Hi there,
Here is the new firmware https://url.bee-link.cn/mShG ,here is the tutorial https://url.bee-link.cn/wcvF @All
Добрый день! Нужна прошивка для программатора, можете скинуть дамп на почту. GTi14-l-321tbvk0w64pr, sn:3850836n20,mb AWZ_gti14_v1.0
При прошивке отключилось питание.
Добрый день! Нужна прошивка для программатора, можете скинуть дамп на почту. GTi14-l-321tbvk0w64pr, sn:3850836n20,mb AWZ_gti14_v1.0
Во время обновления прошивки произошло отключение питания.
Alexei1145 Please send us a picture of the SN on the bottom of the PC.
Please press delete key as soon as you turn on the PC, so that you can go to BIOS. Please send us a picture of the Main page.
We will check if you need to update the BIOS.
День добрый . Подскажите что мне нужно обновить .При выключенном ПК LAN мигает.
Product: MINI PC
9B.3850836N20
SN:B185H4BG80025
GTI14-L-321TBVK0W64PRO-DP/XA/D/O
BIOS Version GTi14T201
09/23/2024 15:47:57
Serial Number B185H4BG80025
EC Version 010A.
voms1 Hi,you could update the BIOS to T204,we will send you the tutorial via private discussion,please check.And this is because the PC enters modern standby mode after shutting down, so it will still be blinking. If you want to shut down completely, you need to unplug the power supply.