Beelink GTi14 Question Summary Q: Does GTi Ultra support external graphics cards? A: Hello, GTi Ultra supports external graphics cards, but it needs to be paired with our graphics card expansion dock, and the graphics card dock station has a 600W independent power supply. Q: Why does the GTi Ultra speaker have no bass? A: Hello, the built-in speaker of GTi Ultra optimizes the human voice, highlights the mid-high frequency band, and makes the sound clearer and more prominent. Q: Why can’t GTi Ultra directly use the power supply of the expansion dock to power the PC? A: The PC and the expansion dock are two independent products. Although they can be used together, there are also users who buy them separately, so they need to be powered independently. Q: What is the TDP of GTi Ultra? A: The maximum stable power at full load is 65W. Q: In addition to external graphics cards, can the graphics card dock also connect other PCIE devices? A: The PCIE interface expanded by the graphics card dock is a standard interface, supporting standard PCIE devices such as sound cards, capture cards, network cards, and expansion cards. Q: Is there any loss when connecting an external expansion device to the 8X interface? How much? A: There is basically no loss when using a 4080 graphics card or below. Q: How to select the audio output and input source? A: Settings - System - Sound, select speakers and microphones. Q: Will the graphics card dock block the bottom air intake and speaker sound? A: There is a certain distance between the host and the graphics card, which will not block the air intake and sound. Q: Can AI voice interaction use voice commands to command computer operations like Xiaoai classmate? A: We provide a voice interaction platform that can use any AI large model that supports voice interaction to effectively help you solve problems. Q: Can the SD card used for the camera be connected? A: The SD card interface supports high-speed camera SD cards and TF cards inserted into the card holder, with a maximum speed of up to 312MB/s. Q: Why is there no AMD processor? A: Because Intel processors are optimized and more compatible with more software, provide better productivity, and can be connected to external graphics cards without using the core graphics of Intel processors. Q: What is the external transmission speed of the graphics expansion dock? A: The transmission speed of the graphics dock is PCIE 4.0 ×8, and there is almost no loss for external graphics cards. Q: What is the power of the built-in power supply of the expansion dock? A: The built-in power supply of the graphics dock is 600W. Q: What other functions does the expansion dock have besides external graphics cards? A: The graphics dock has a built-in 600W power supply, supports M.2 hard disk or Wi-Fi network card expansion, only one of the two can be selected, and there is another USB interface. Q: Can GTi Ultra use a third-party graphics expansion dock? A: No, the GTi Ultra graphics dock is customized and is not compatible with third-party expansion docks. Q: Does GTi Ultra support Thunderbolt graphics expansion docks? A: Yes, GTi Ultra has a Thunderbolt 40G interface and supports external Thunderbolt graphics expansion docks. 17.Q: The minimum standby power of GTi Ultra is 28W. Is this normal? A: This is normal power, because the built-in power supply itself, built-in speakers, fingerprint recognition module, USB HUB, etc. all have certain power consumption, and the Intel Ultra processor is very powerful and will also have higher power consumption, so 28W is within the normal power range. Q：The performance drop sinificantly when connecting to the EX docking station, what should we do ? A: If your PC connected to the EGPU, the performance goes down,and there are stutters in games, please go to device manager and disable integrated graphic. Also, please go to 【BIOS】-【Advanced】-【System Agent（SA）Configuration】-【Graphics Configuration】-Set【Primary Display】to【IGFX】-press F4 to save and exit. 19: What power connector should I use for my graphic card? A:【Notice】— The docking station features two 8-pin power connectors. If your graphics card requires 3× 8-pin connectors, you may need an 8-pin to dual 8-pin adapter cable. If your graphics card uses a 16pin port, you may need a 2×8pin to 16pin adapter cable. You can learn more at https://buildin.ai/lizong/share/3550479f-6d3b-4cc9-bc40-892722c1e0b6

①GTI14 T108 BIOS ,solve 96GB RAM issue,please note that only the version T100-T105 can update this BIOS： https://url.bee-link.cn/SCz2 ，here is the tutorial ： https://url.bee-link.cn/Ou3r ②GTI14 T202 BIOS ,solve 96GB RAM issue,please note that only the version T106 and T201 can update this BIOS . BIOS： https://url.bee-link.cn/Cfx8 Here is the tutorial： https://url.bee-link.cn/5bV8 Please press delete key as soon as you turn on the PC, so that you can go to BIOS. On the main page, you can check your BIOS version.

Is it possible and is it safe to install 2× 8TB NVME SSD’s i.e. Western Digital Black into the GTi14?

PeteKowalsky It might cause insufficient power ，result in SSD not being recognized.

Where I can find a place to download the latest drivers and BIOS for the GTI14 Ultra? Can I use two simultaneous Wifi Cards, one on the GTI Ultra and the other on the EX Dock? Can I use two simultaneous Wifi Cards, one on the GTI Ultra and the other on the EX Dock?

Joselito Hi there, Here is the driver https://url.bee-link.cn/qwOm The WIFI slots cannot be used at the same time

You can get the latest drivers and BIOS for the GTI14 Ultra from the company’s own official support web portal. Installing two Wi-Fi cards is possible if both hardware and software supporting such a possibility is present on the respective machines, although you would possibly have to make network configurations in order that conflicts may not arise.

What is the supported type of Wifi Card on the EX Dock? What should I buy? [unknown] So you will need to remove the one installed on the GTI14 Ultra and install it on the EX Dock if you want to use it with external antenas? [unknown] So you will need to unistall the existing card inside the GTI14 Ultra in my case and install it on the EX Dock so you can use the setup with external antenas? [unknown] So you will need to unistall the existing card inside the GTI14 Ultra in my case and install it on the EX Dock so you can use the setup with external antenas?

Joselito Docking can support the connection of pcie format wireless network cards and in-band array antennas. When you install a WiFi network card in the dock, the network card in the machine needs to be removed.

Beelink CS-George Is the network card on the machine compatible and can be installed on the EX Doxk if removed from the machine? Is there any video or documentation on installaing a network card on the EX Dock, requirements, Type of card compatible???

Joselito Please see my video about it

FAQ for GTI14

Beelink CS-Jane

w2 Hi there,the maximum supported memory is 96G(48*2).If you install (2× 64gb) RAM,there may cause the compatibility issue.Please send us a picture of SN on the bottom of the PC to private discussion,we can send you the corresponding BIOS files.

w2

Done, awaiting your reply

Beelink CS-Jane

w2 Hi there,we’ve replied you,please check it.

w2

Thank you that was very helpful!

One quick other follow up question:

The PCIE lanes for the two M.2 drives, are they shared? I can install a second M.2 drive while I am upgrading the RAM, but my question is if it matters on the read/write speed of the M.2 drive. If it is capped because the lanes are shared, then I do not need to buy a high performance M.2 drive

e.g. the Samsung 990 PRO NVMe™ M.2 SSD with speeds up to 7.450 / 6.900 MB/s
https://www.samsung.com/de/memory-storage/nvme-ssd/990-pro-4tb-nvme-pcie-gen-4-mz-v9p4t0bw/

the Crucial P3 Plus 2TB PCIe M.2 2280 SSD with speeds up to 5,000/4,200MB/s
https://www.crucial.com/ssd/p3-plus/CT2000P3PSSD8

Beelink CS-Jane

w2 Hi there,you are welcome.
The PCIE lanes for the two M.2 drives are separate.

w2

Beelink CS-Jane Thank you for all your help!

hookoo

w2 Did you get proper answer to the 128GB memory question privately? I’ve tried to ask it from support also and the answer was just that officially it supports 96GB. No answer if they actually have tested that 128GB does or doesn’t work. Would be nice if you could share if you have any further info and if you are going to install 128GB.

Beelink CS-Jane

hookoo Hi there,the maximum supported memory is 96G(48*2).If you install (2× 64gb) RAM,there may cause the compatibility issue.

w2

hookoo Yes, they said also 96GB to me. To be clear, I looked up the specs on the CPU and there it also states a max of 96GB, so this is due to the CPU, not the rest of the hardware from Bee-Link

https://www.intel.com/content/www/us/en/products/sku/236849/intel-core-ultra-9-processor-185h-24m-cache-up-to-5-10-ghz/specifications.html#:~:text=on%20memory%20type)-,96%20GB,-Memory%20Types

vitasonline

I previously had a GTi14 155H 32G/1Tb, but I sold it and now bought a GTi14 185H 96G/2T, which works faster in graphics programs and video editing. 96G RAM is enough for modern programs, no more is needed.

Beelink CS-Jane

vitasonline Hi,thanks for sharing and your support.

Oni

Just bought a gti14, when ever it needs to restarts the screen goes black during till I do a hard boot after one or two tries the machine will restart.

Beelink CS-Jane

Oni Hi there,sorry for the trouble. Please send us a picture of SN on the bottom of the PC and a picture of the purchase record. Here are some potential solutions：
1.Please take out the RAM ,please clean the contacts of the RAM with a rubber. Here is the tutorial https://mega.nz/file/XqZX0TIR#_DtO2oa4aRP4bWtvxgKLj4QGhBpQ959cg5U3Yw4u1Cc
Next,please take out one RAM and leave the other one in it to test if the RAM is defective or not. When testing, please turn on the PC, and wait about one minute, if you can go to the system, Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save. （If the PC comes with onboard RAM, you can ignore this solution ）

2.Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the Main page, we will check if you need to update the BIOS.

3.Overheating. If your PC is overheating, please check if the fan spins. You can also turn off the turbo boost. Go to control panel —power option—change to High performance— change plan setting—advanced setting —processor power management— change both 100% to 99% , click save.

4.Update graphics driver.

gern9091

Hello.
On August 25, 2024, I bought Beelink GTI14 185H. In November 2024, I replaced the RAM with 2×48=96gb.
The computer worked perfectly and without problems.
On September 6, 2025, I turn on the computer and there is no video signal. I found the problem as I had and followed all the steps.
https://bbs.bee-link.com/d/7110-gti14-no-hdmi-signal/2
These recommendations did not help, the computer booted after 5-10 attempts and after 1-2 minutes it froze. I tried to reinstall Windows, at the final stage of installation a blue screen with an error appeared. I did these operations several times with different iso Windows 10 and 11. The situation did not change, I could not completely install the system, the computer froze. I replaced NVMe, it did not help, the freeze did not go away. Returned the old memory 16×2=32gb, also did not help, the computer hung. According to temperature tests, everything was normal. There was no dust in the case and on the boards.
Then I read the forum bbs.bee-link.com and they advised me to flash the bios. I did everything according to the instructions, downloaded GTi14T108-Note-Only-original-version-is-T100-to-T105-can-update and launched it from a flash drive and at the update stage the computer froze at 9%, after 30-40 minutes I turned it off. After that I can’t enter the bios, the computer power turns on, the keyboard lights up, but there is a permanent black screen without a video signal.
I am attaching screenshots of the BIOS version before the firmware and a screenshot when the computer froze during the BIOS firmware process. What should I do? Why did such problems start a year after the warranty expired?

Image description

Beelink CS-Jane

gern9091 Hi there,we’be replied you via our after-sale email account,please check it.

ewertonaraposo

I am a user of the Beelink GTi12 Ultra (Intel Core i9-12900HK) and I am currently experiencing significant thermal throttling issues. When running demanding tasks and games, the CPU temperatures quickly reach 100°C, causing performance drops and stuttering.

I would like to clarify a few technical points to resolve this:

Thermal Interface Material: Could you please confirm if this specific model (GTi12 Ultra with i9-12900HK) uses Liquid Metal or standard thermal paste between the CPU and the heatsink?

Repasting Recommendation: In case it uses standard thermal paste, do you recommend a repaste to improve temperatures? Also, if I open the device for cleaning and repasting, will it void my warranty?

Fan Profile: Is there a recommended BIOS update or software to better manage the fan curves for high-performance scenarios?

I am currently using an external GPU (RTX 5070 Ti) via the EX Dock, but the CPU temperatures remain a bottleneck for my system’s stability.

I look forward to your guidance on how to fix these thermal issues.

Best regards,

Beelink CS-Jane

ewertonaraposo Hi there,please send us a picture of the SN on the bottom of the PC.
We do not recommend to repaste it yourself, as this will void the warranty.
Please try the below solutions:
1.Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the Main page, we will check if you need to update the BIOS.

2.Please adjust the fan speed:https://buildin.ai/f609f9cc-c207-47d0-bf1e-6ea17a51b4cb

3.Please check if the fan spins. You can also turn off the turbo boost. Adjust power settings: Adjust the power settings on your PC to optimize performance and reduce heat generation. Lowering the maximum processor state or using power-saving modes can help.Go to control panel —power option—change to High performance— change plan setting—advanced setting —processor power management— change both 100% to 99% , click save.

ewertonaraposo

Beelink CS-Jane
Image description

Image description

Beelink CS-Jane

ewertonaraposo Hi there,the BIOS is up to date.
May I know have you test the other solutions yet?

« Previous Page