SER Series Driver and BIOS download

Beelink CS-George · 2025-03-26T05:42:20+00:00

Here is the SER Series drier and BIOS download source https://dr.bee-link.cn/?dir=uploads%2FSER

Genilan

Hello, I need assistance identifying the correct BIOS updates for several Beelink devices belonging to my clients. The download section on your website is unclear due to inconsistent naming conventions and publication dates, which makes it difficult to determine the proper BIOS version for each model.

Below are the models, serial numbers, and current BIOS versions:
Serial Number | Model | BIOS Version

A55603BH80042 | SER5 | FP655U508
Y69004HH90210 | SER6 | SER6p_P5C8V11
B87455IG00511 | SER8 | HPT.8xxx.SER8.V029.P8C0M0C15.13.Link
B255H6DH90478 | SER9 | SER9T501
B125H5JF90027 | SEi14 | SEi14T119

Could you please confirm and provide the correct latest BIOS update file for each device and provide the appropriate download links?

In addition, I noticed that the BIOS update package SER9T502_WinFlash contains the file winring0×64.sys, which is being flagged as a security risk.
Both Microsoft Defender and VirusTotal detect this files as vulnerable and infected
• Microsoft Defender: https://www.microsoft.com/en-us/wdsi/threats/threat-search?query=VulnerableDriver:WinNT/Winring0
• VirusTotal analysis: https://www.virustotal.com/gui/file/11bd2c9f9e2397c9a16e0990e4ed2cf0679498fe0fd418a3dfdac60b5c160ee5
Could you please verify this issue and provide a safe, clean BIOS update package that does not include any vulnerable or flagged files?

Thank you for your support.
Best regards,
Ashik

Beelink CS-June

Nicpaut

Hello there,

Based on the situation you described in other posts, we suggest that you contact support-pc@bee-link.com to discuss the after-sales repair or replacement of your machine.
The current malfunction of your machine should not be resolved by updating the BIOS.

Have a nice day~

Genilan

Hello Ashik,

Could you please send us pictures of SN code(two lines) at the bottom of your all machines ?

Then we can help you better.

Have a nice day~

KubaPP

@Beelink Hello,

Please provide the latest official newest BIOS and complete driver package for this this one:

Genilan

Beelink CS-June
Hello,

Thank you for your response.

I would like to clarify that we have a significant number of Beelink units that were purchased from Amazon and deployed directly across various client facilities. As a result, it is not feasible for us to take individual photos of each device.

However, I can provide you with the list of serial numbers, along with the corresponding invoices for each unit, should this information assist you in identifying the correct BIOS versions or validating the devices.

Please let me know if this documentation will be sufficient
Regards
AShik

Beelink CS-June

KubaPP

Hello there,

Here is the driver file for your machine: https://url.bee-link.cn/wm58

Here is the tutorial: https://buildin.ai/lizong/share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the Main page, we will check if you need to update the BIOS.

Have a nice day~

Genilan

Hello there,

We suggest that you contact our after-sales email - support-pc@bee-link.com to obtain the BIOS file you need.

You can send us an email providing the serial number list for each device along with the corresponding invoice. Our staff will then send the corresponding BIOS files to you.

Since there are quite a few machines that require BIOS updates, sending emails to provide the information might be more convenient.

Have a nice day~

Jeff C

Can someone point me to the proper Win 11 drivers for a SER 4000 Series with a Ryzen 7?

SN SHB47002JG20851
SER4-47-16500EJ0W64PRO-B

Thanks

Beelink CS-June

Jeff C

Hello there,

Here is the driver file for SER4 4700: https://url.bee-link.cn/Pfhf or https://url.bee-link.cn/SzSO

Here is the tutorial: https://buildin.ai/lizong/share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

Have a nice day~

Genilan

Beelink CS-June
Hello,
I sent an email with the invoice attached to the address you provided.
Could you please follow up and let me know if it was received
Regards
Ashik

JasonZ

Hello,

I have a SER9 Pro Machine, and I would like to update it to the latest BIOS version. Can you please provide me the most up to date official BIOS files for my model? The details of my machine are attached below:

Thank you and have a great day!

Jason

Beelink CS-June

Genilan

Hello there,

Could you please send me the email address you used to send the email through a private message?

We will check if we have received your email and reply to it as soon as possible.

Have a nice day~

JasonZ

Hello there,

I have sent you the lastest BIOS file, please check your PM.

Have a nice day~

KubaPP

Beelink CS-June I see no links in your previous post. Pls check BIOS photo below:

Beelink CS-June

KubaPP

Hello there,

Here is the driver file for your machine: https://url.bee-link.cn/wm58

Here is the tutorial: https://buildin.ai/lizong/share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

I have sent your the lastest BIOS file, please check your PM.

Have a nice day~

tkiese

Hello,

After BIOS update to 408 or 409, RDSEED32 error is still remaining, but there is also a new error occurring.
After supend/resume the fan is spinning at high speed and cannot be regulated and is not getting the expected values.
Only a reboot is solving the fan problem, but it is occurring again after next suspend.
Is there any further advice how this can be fixed and how the RDSEED32 error can be solved?

Error:
kernel: RDSEED32 is broken. Disabling the corresponding CPUID bit
Fanspeed after suspend/resume at high speed, which is no problem with BIOS SER9T407

SN: BHXC375AG30069

BIOS SER9T407 - Analysis

inxi -S

System:
Host: yeti-bee Kernel: 6.18.39-x64v3-xanmod1 arch: x86_64 bits: 64
Desktop: GNOME v: 48.7 Distro: Debian GNU/Linux 13 (trixie)

journalctl -k -b -0

..
efi: EFI v2.9 by American Megatrends
DMI: AZW SER9/SER9, BIOS SER9T407 12/17/2025
…
kernel: RDSEED32 is broken. Disabling the corresponding CPUID bit.

BIOS SER9T409 - Analysis

RDSEED32 error should be fixed with the firmware update, but it isn’t!

inxi -S

System:
Host: yeti-bee Kernel: 6.18.39-x64v3-xanmod1 arch: x86_64 bits: 64
Desktop: GNOME v: 48.7 Distro: Debian GNU/Linux 13 (trixie)

journalctl -k -b -0

…
efi: EFI v2.9 by American Megatrends
DMI: AZW SER9/SER9, BIOS SER9T409 06/23/2026
…

kernel: RDSEED32 is broken. Disabling the corresponding CPUID bit.

Fan Speed/Sensors error in 408 and 409
Fan Speed and Temperature output measured before suspend
fan2: 1421 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +33.0°C (low = -128.0°C, high = +127.0°C) sensor = thermal diode
temp2: +32.0°C (low = -128.0°C, high = +127.0°C) sensor = thermistor
temp3: +32.0°C (low = -128.0°C, high = +127.0°C)

Output after resume (no proper values available) - NOK
fan2: 0 RPM (min = 0 RPM) ALARM
fan3: 0 RPM (min = 0 RPM) ALARM
temp1: -1.0°C (low = -1.0°C, high = -1.0°C) ALARM sensor = thermal diode
temp2: -1.0°C (low = -1.0°C, high = -1.0°C) ALARM sensor = thermal diode
temp3: -1.0°C (low = -1.0°C, high = -1.0°C) ALARM

Output after reboot, back to the expected behaviour - OK
fan2: 1448 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +35.0°C (low = -128.0°C, high = +127.0°C) sensor = thermal diode
temp2: +31.0°C (low = -128.0°C, high = +127.0°C) sensor = thermistor
temp3: +31.0°C (low = -128.0°C, high = +127.0°C)

Fanspeed using Bios SER9T407 - OK

Before suspend
fan2: 1506 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +38.0°C (low = -128.0°C, high = +127.0°C) sensor = thermal diode
temp2: +33.0°C (low = -128.0°C, high = +127.0°C) sensor = thermistor
temp3: +33.0°C (low = -128.0°C, high = +127.0°C)

After resume - OK
fan2: 1490 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +37.0°C (low = -128.0°C, high = +127.0°C) sensor = thermal diode
temp2: +32.0°C (low = -128.0°C, high = +127.0°C) sensor = thermistor
temp3: +32.0°C (low = -128.0°C, high = +127.0°C)

I am just using the sensors output for this,showing the result, showing values are missing or not getting applied by the firmware when resuming.
Any advice would be welcome.

Thank you
Thomas

musti

Please provide the latest official newest BIOS and complete driver package for this this one:

Product: Mini PC
8B.024670834G10
SN:B255H5BG70299
SER9 Pro+-L-321TBVK0W64PRO-DP/XAW6

Beelink CS-June

tkiese

Hello Thomas,

Could you please send us a picture of SN code(two lines) at the bottom of machine ?

You can try to clear CMOS : Please turn off the PC , unplug the power supply and HDMI cable , and press the CMOS pinhole for about 10 seconds. Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.
Please wait about one or two minute, if you can go to the system.
Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save.
Here is the tutorial ：https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms

Could you please take a picture of the BIOS main screen of your machine for us to see?

Then we can help you better.

Have a nice day~

musti

Hello there,

Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the Main page, we will check if you need to update the BIOS.

Here is the driver file for your machine: https://url.bee-link.cn/wm58

Here is the tutorial: https://buildin.ai/lizong/share/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

Have a nice day~

wrexrrw

Hello. I have a SER9 Pro H255 running Linux that appears to be having issues restarting DisplayPort on wake. I understand it may be due for a UEFI update. Here is the current info:

Please advise. Thank you.

Beelink CS-June

wrexrrw

Hello there,

Based on the SN image and BIOS information you provided, it seems that your machine is of the SER9 370 model.

1、You can try to clear CMOS : Please turn off the PC , unplug the power supply and HDMI cable , and press the CMOS pinhole for about 10 seconds. Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.
Please wait about one or two minute, if you can go to the system.
Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save.
Here is the tutorial ：https://mega.nz/file/XypwTISY#DVT0BsjOgiPkZ-drQaj88JH9Z7f7qpKGP2E3nMHW8ms

2、Please update the BIOS.

I have sent you the lastest BIOS file, please check your PM.

Have a nice day~

Thumok

Hello,

I’ve got a SER5 PRO-E-321TBEJ0W64PRO-DP/XB and would like to perform a BIOS Update (and update the UEFI certificates).
Could you please send me the latest BIOS update for this machine.

Thanks a lot!

Orben0985

Hello,

Please help confirm if I have the latest BIOS and which version to download if not.

Thank you!

Beelink CS-June

Orben0985

Hello there,

May I ask if your machine is SER5 PRO 5800 with a HDMI port and a DP port?

If so , the lastest BIOS version of your machine should be the SER5H516?

Could you please send us a picture of SN code(two lines) at the bottom of machine ?

Then we will send you the lastest BIOS file.

Have a nice day~

Thumok

Hello there,

I have sent you the lastest BIOS file, please check your PM.

Have a nice day~

« Previous Page Next Page »