Rx 9070 and ex station

jooli

Rx 9070 card won’t work with ex station, only with ex pro?

support16

jooli Hi,you could try to change the BIOS:Chipst – System agent – PCI Express Congiguration – PCI Express Root Port 2 – PCIe Speed (default Auto change to gen4). PCI Express Root Port 2–PCIe Speed (default is Auto change to gen4)

jooli

I could try it, but I’d have to buy the card to do it, so I’d like to know in advance if it’s worth buying. It would be a shame if the gti12 I bought a couple of months ago with the docking station didn’t work with the card I’m about to buy

support16

jooli Hi,you could refer to the below information, Image description
The EX Docking Station support the above cards and need to be under 600w.About the RX9070,we are still testing it.The EX Pro Docking Station have 【Dual chips with turbo-charged performance】— Hardware Upgrade: The addition of two PCle 5.0 signal enhancement chips ensures maximum performance, delivering seamless support for NVIDIA RTX 50 series and AMD RX 9000 series graphics cards.

szakal87

support16

support16 I confirm the 9070 with ex docking station pro working. But unfortunately, the pci express gen 5 mode does not work(The display does not turn on - the card is detected but after instslation of the drivers gpu disappears from, Windows 😳😳 only change pci to gen 4 resolve this issue) . After contacting your support, you said that your R&D department is working on a solution . My question is, why didn’t you check it? And the second question is when will I be able to enable gen 5 on my ex docking station pro?

support16

szakal87 Hi,thanks for your sharing.We are still optimising this issue,if there is any updates,we will keep our customers posted.