bios update failed.. stuck on boot

taehyun

I’m using the Beelink SER5 MAX 5800 model. Yesterday, I downloaded the BIOS update file for that model, booted it via USB, and without pressing anything, it seemed to be stuck on the EFI screen. I rebooted, but it wouldn’t boot anymore, only a black screen appeared. Can I restore the BIOS and use it again?
Image description

support6

taehyun
Can you access the BIOS now? If so, please provide a screenshot of your machine’s BIOS main page.

Please try the following methods:

①Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. On Save&Exit page, please click Restore defaults, press enter to confirm, then press F4 to save.

②Please press delete key as soon as you restart the PC, so that you can go to BIOS. Then go to boot page, set SSD as the first option.

③Please take out the SSD and reseat it securely.

④Please reinstall the system.

taehyun

When I try to boot by pressing the power button, the power button lights up, but the screen is in power saving mode and no screen is displayed. After removing all cables and pressing clr-reset for more than 20 seconds, I waited for more than 30 minutes and reconnected the cables and tried to turn the power on, but there was no response.

support4

taehyun
Hi there
You might have flashed the wrong BIOS.
And need to send it back to china .

Please email us here with your SN code pic and purchase record .
Support-PC@bee-link.com