Is there a way to disable auto-power on when restarting the power? I turn off in the BIOS, auto-power on, wake-up on LAN and also on network devices, but my U59 still boots up Thanks in advance

Hi there, please send us a picture of SN on the bottom of the PC, we will check if you need to downgrade the BIOS

Hi George, This is the SN. Thanks

Hi there, please flash this BIOS https://url.bee-link.cn/CU7Q , here is the tutorial https://url.bee-link.cn/lbNf

Hi George, When execute de comand I have an error. Thanks for your time.

Sergi Sorry, but the picture is not clear, could you please send another one or a link ?

Hi George, This is the image of the error: 18 - Error: Secure flash rom verify fail [ https://we.tl/t-OfUhKslh9s ] (https://) Thanks in advance

Sergi Hi there, Did you enable secure boot in the BIOS ? Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. On Save&Exit page, please click Restore defaults, press enter to confirm, then press F4 to save.

Hi George, I do it but I have the same error before. 18 - Error : Secure Flash Rom Verify fail Thanks for help me

U59 Disable auto power on

Beelink CS-George

Please try another USB flash drive

Sergi

Hi George,

I tried from desktop and I have the same error.

Beelink CS-George

Hi there, please take out the CMOS battery and then put it back after a few minutes.

Sergi

Hi George,
I dissable the CMOS battery for some minutes but then I have the same error that before:
18 - Error: Secure flash rom verify fail

I don’t know what happens.

Thanks for your time

Sergi

Hi George,

Can you send me another Bios file to try?

Thanks

Beelink CS-George

Sergi Hi there, but this is the only BIOS file we have if you want to disable the auto power on.
Did you try another USB flash drive ? What is the format ?

Sergi

Hi George,
I have the same error id the files are in Desktop or in an other USB. Image description

Beelink CS-George

Sergi Hi there, could you please offer a clearer picture or link?

Sergi

Hi George,

[https://we.tl/t-NpwBns1cEV](https://)

Thanks

Beelink CS-George

Sergi
The reason for the unsuccessful flash may be that the BIOS cannot be rolled back.
We recommend performing a power-on boot.

Sergi

Hi George,

So, does that mean I can’t go back to the other BIOS to disable boot on startup?

There is no way to disable start-up when power on?

Thanks

Beelink CS-George

Sergi
Thank you for your reply.
Yes. That’s the current situation.
It might be feasible to manually flash the BIOS by sending the machine back to China.

« Previous Page