Hello. When I connect the Type-C cable monitor to a Gti14 mini computer with Thunderbolt 4, the monitor does not show the image (power is supplied to it, but no image is received). If I still connect Type-C Power to second port and I reconnect the connector usb type-c to Thunderbolt 4, then it begins to show the image. Why? If I use the same monitor with another mini pc on Chatreey T9 (Intel N100 CPU), it works with one usb type-c cable. It seems to me there is a problem with Thunderbolt 4 in this GTi14 Ultra. I updated the BIOS from T102 to T105 but it did not solve the problem!

New link on this video: http://xhslink.com/a/uDQwfz4sX9AV

vitasonline Hi there, Does it work if you turn on the PC first and then connect to the Type-C cable monitor ?

support1 No, it doesn’t work that way either, power will be supplied to the screen, but the image signal will not go through. It only works if external power is supplied to the screen and only then connect the tunderbolt cable. Please check it out on your monitor and send me the video.

Hi there, The monitor that requires external power before connecting the Thunderbolt cable might have higher power consumption. The power delivered through the Thunderbolt 4 port on the Gti14 mini computer alone might not be sufficient to power up the monitor and transfer the video signal simultaneously. When you connect an external power source to the monitor first, it ensures that the monitor has enough power to operate properly and then the Thunderbolt cable can handle the data transfer for the image display. When I tried our TYPE C monitor, it works without extra power, it has lower power requirement and can operate within the power limits provided by the Thunderbolt 4 port without the need for an additional power source.

support1 Hello, I checked the power consumption of my monitor and one maximum is 4W, and its specifications indicate that it does not need external power. And this monitor works great with a mini PC chatreey T9 over one type-c cable. Thunderbolt should give out up to 15W of power. Write the monitor model that you tested, or better yet, make a video.

vitasonline Hi there, The TYPE C monitor is INNOCN 13A1F Here is the video https://mega.nz/file/jixxXLZB#BcSzH8CKAKOq2Y4OoK-sb8jJl7Qjfz3gtjS1MnYtjzA

support1 Thank you! I’ll check on another monitor. My video review on Youtube channel -

support1 Hello! I tested both my mini computers via usb type-c tester POWER-Z KM003C о from ChargerLAB. When I connect the monitor to the PC chatrey t9, both power and image are transmitted via one cable, the tester detects the Svid protocol and the image immediately appears on the monitor after pressing the power button on the PC: But when I connect the monitor to the PC Gti14 ultra, only power is transmitted through one cable, the tester does not detect the Svid protocol and there is no image on the monitor after pressing the power button on the PC. If I connect the second type-c cable to power the monitor, the PD protocol changes from 15W to 5W and there is no image. When I reconnect the cable, the image starts to show. You can test POWER-Z KM003C with your INNOCN 13A1F monitor ?

T9 and GTi14 with type-c cable from the monitor kit T9 with type-c cable from the monitor kit and GTi14 with thunderbolt 4 cable GTi14 does not display image even with thunderbolt 4 cable gti14.sqlite3 112kB t9.sqlite3 148kB original-images.zip 757kB

vitasonline ① Reason for no image with single cable connection: Incompatible cable: The cable you are using might not be fully compatible with the power and data transmission requirements for both the PC and the monitor.Ensure that you are using a cable that is specifically designed for connecting your PC and monitor ②Reasons for PD protocol change and no image with second cable connection: Power management issue: The PC might be detecting the second cable connection as a different power source and adjusting the power delivery (PD) protocol in a way that causes issues with the monitor’s operation. Conflict between cables: The simultaneous use of two cables might be causing some kind of conflict or interference that is preventing proper image display. ③Update drivers: Update the graphics card drivers on your PC to the latest version to ensure proper compatibility with your monitor. ④Test different ports and cables: Try connecting the monitor to different ports on the PC and using different cables to see if the problem persists. This can help identify if the issue is with a specific port or cable. ⑤ Sorry, I am not in the office until Oct.8th, so I am unable to test the power-z

GTi14 Ultra Thunderbolt 4 Problem (PD and DP not working together)

support1

vitasonline
Hi there,
If your type c cable is not a all-in-one cable, then it cannot support video output, maybe it can only support video output,but not power supply. So when you connect another cable to charge it, it can output the video .

vitasonline

support1 I use the same cables with T9 and GTi14 !
But in T9 it works power delivery + display port at the same time, and in GTi14 only power delivery works

support1

vitasonline Hi there,

It might the cable incompatibility issue.
When we use an all- in-one cable , it works with power delivery + display at the same time.

narumivtl

support1

Hi Can you recommend a cable that is compatible?

vitasonline

I tried different cables and bought UGOURD Thunderbolt 4 Black 40G 240W 8K which has a PD chip and is defined in the E-marker cable as 0×315C vendor. But no cable displays an image.😂

support1

vitasonline That is weird.
Could you please try another one , like https://amzn.asia/d/gOfPu20

narumivtl

https://amzn.asia/d/5QDAgY3
I have bought this but is doesnt work to my usb c portable monitor and external gpu

support1

narumivtl what is the brand of your monitor ?

vitasonline

I updated thunderbolt chip firmware on my GTi14 155H with T105-BIOS firmware and finally now my monitor Arzopa Z1RC works through one type-c cable!!!

support1

vitasonline Glad to hear that 🍻

dahjah

i would like to know exactly how to update thunderbolt firmware, as my thunderbolt port shuts off sometimes (after restart or shutdown) and seems like not much i can do to get it running again. I’ve tried a few different usb drives and none show up in the boot menu to boot from.
I followed the tutorial on how to put the files on the usb drive and nothing is working for this port.

support1

dahjah Hello there,
Please send us a picture of the SN on the bottom of the PC，we need to check your item model first

marioeivissa

anybody can tell me if i can provide of enough power to my mini pc from a usb c port of my monitor if from monitor port we have 65w of power?
So I want to get rid of the mini PC’s original power supply so that it only runs on the power it gets from my monitor’s USB-C, or will be better inverse way?

support16

marioeivissa Hi,this may result in insufficient power supply.

marioeivissa

support16 thanks for your answer, another question: i bought beelink gti14 185H, with windows 11 installed, should i update any driver or any bios?

support16

marioeivissa Hi,please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the main page, we will check if you need to update the BIOS.
Here is the latest driver:https://url.bee-link.cn/qwOm you could refer to the tutorial:https://buildin.ai/lizong/50c2dee7-dcde-4707-97d8-dc7eac84a4eb

« Previous Page