Hello! I’ve been waiting for a long time for the firmware for Thunderbolt 4 on my GTi14 ultra 155H. What’s new in this firmware anx7406(2024-11-13)_2024-11-14_8-06-32? Please write changelog. I hope this will solve my problem of simultaneously powering the monitor and DisplayPort through one cable TB4.

Hi there, Here is the thunderbolt chip firmware https://url.bee-link.cn/2iJ1 here is the tutorial https://url.bee-link.cn/U50s

support1 I updated thunderbolt chip firmware on my GTi14 155H with T105-BIOS firmware and finally now my monitor Arzopa Z1RC works through one type-c cable!!! Thank you Beelink! You made my day! You guys are great!

Hi, Im using GTI14 185H with latest BIOS 201. How do I update the “anx7406(2024-11-13)_2024-11-14_8-06-32” via usb? I have followed the instructions document but it wont boot from the USB to update?

narumivtl You should simply enter the BIOS using the DEL key when booting and in the BOOT section select simply Launch EFI Shell and then enter the command: FS0: where FS0 - your usb flash drive

vitasonline Took me a while to figure it out, it was the last EFI selection as you said. Anyways I have updated and finally! my USB C portable monitor now works with a single cable!!! so happy!

I followed the instructions for “anx7406(2024-11-13)_2024-11-14_8-06-32.zip” but it does not load anything it keeps bouncing back to choose boot drive screen. How do I get this to work? In the future all of these update should be available to be completed inside windows instead of bios screen. Most users would not be capable of completing the instructions.

lud14 Did you put all the files into the root directory of the USB flash drive ? Could you please send us a picture to show the files on your USB drive ?

lud14 Hello! Watch my video, I show you how to flash it

GTi14, SEi14 Thunderbolt Chip Firmware Flashing

dahjah

my secure boot is off my usb is loaded just like the the pic “lud14” posted, I’ve tried what I could understand in the video with fs3 and ls and all I keep getting is “is not recognized as an internal or external command…”

support1

dahjah Hi there
Did you type colon after fs3?

dahjah

support1
That “fs3:” seems to have worked so far. The thunderbolt port opened up and all connected is working again.
Thanks!

dahjah

No, I’ll try that today

dahjah

Well al worked great yesterday, I shutdown a few times restarted a few times throughout the day just making sure all was well, and it was until this morning. This morning the thunderbolt port isn’t working again after shutting down over night.

support1

dahjah Hi there, Please turn off the PC , unplug the power supply and other USB devices, then put the pin in the CMOS pinhole and press it for about 10 seconds , restart the PC after ten minutes.
Here is the tutorial https://url.bee-link.cn/5FdW

Joseitogreg

The firmware update is done for efi shell opcion no for efi usb device in the boot menu after pulse f7

support1

Joseitogreg Hi there, thanks for your sharing

Twinklekapoor

It appears the EFI USB Device option is not appearing. Try to see if the USB drive is properly formatted, that USB boot is turned on in the BIOS, and try resetting or updating the BIOS. Let me know if that works!

yasdum

Image description
I have gt14i, and get ic 0 active section error 3
IC 0 update error 7. So have can i flash the firmware?

Hankydooodle

yasdum I encountered this same error yesterday when I tried to flash. Were you able to get it working or still running into the same issue?

Beelink User

yasdum
Still the same error 7

vitasonline

yasdum I have gt14i, and get ic 0 active section error 3
IC 0 update error 7. So have can i flash the firmware?

If you get these errors, your Thunderbolt chip does not need to be updated. You have the latest firmware!
I tried to reinstall the same firmware and got exactly the same errors 3 and 7.

yasdum

Hankydooodle Still the same.

support1

Hi there,

Here is the new firmware https://dr.bee-link.cn/index.php?dir=uploads%2FGTI%2FGTi14%2FBIOS-EC%2FNew-GTi14-Thunderbolt-Chip-Firmware @Beelink User yasdum Hankydooodle

Beelink User

support1
Thanx a lot, Support1!
Thunderbolt, have been updated to the new firmware, without any questions.

vitasonline

support1 Hi there,

Here is the new firmware https://dr.bee-link.cn/index.php?dir=uploads%2FGTI%2FGTi14%2FBIOS-EC%2FNew-GTi14-Thunderbolt-Chip-Firmware @Beelink User yasdum Hankydooodle

Hi support1, Please explain why you named the HUB firmware Thunderbolt firmware?
This firmware New–Thunderbolt-firmware–ASM2307MPTool_v2013.zip has nothing to do with Thunderbolt.
ASM2307 is a USB hub chip and HUB Firmware Solve the problem of high power consumption during shutdown and hibernation. After the update, turning on the fast startup function in the system will not affect power consumption.
Also, this firmware ASM2307MPTool_v2013_2024-08-26_5-37-12.zip has long been available on the Chinese Support site since 2024-08-26 and has nothing to do with Thunderbolt.
Image description

support1

Beelink User Hi there, glad to hear that.

support1

vitasonline
Hi there,

This new firmware has something to do with the thunderbolt. Some users have issue when they use the thunderbolt, such as blue screen . After updating this firmware, it can solve the problem. And you are right that this firmware also solve the problem of high power consumption during shutdown and hibernation. I name it new compare with the old one GTI14-Thunderbolt-Firmware-update-tutorial-.doc, which cannot solve the blue screen issue when connecting to the thunderbolt port.

Alexei1145

Добрый день! Нужна прошивка для программатора, можете скинуть дамп на почту. GTi14-l-321tbvk0w64pr, sn:3850836n20,mb AWZ_gti14_v1.0
При прошивке отключилось питание.
Good afternoon! You need firmware for the programmer, you can send a dump to the mail. GTi14-l-321tbvk0w64pr, sn:3850836n20,mb AWZ_gti14_v1.0
The power went out during firmware.

support1

Alexei1145 Hello there,

Please press delete key as soon as you turn on the PC, so that you can go to BIOS. Please send us a picture of the Main page.
We will check if you need to update the BIOS.

Alexei1145

support1 Добрый день! Нужна прошивка именно для программатора , до этого была прошивка GTi14-T106. Нужен дамп слитый с микросхемы. Или для прошивки микросхемы 25q256. Прошивка по usb не подойдет. Пк на данный момент не включается.
Good afternoon! The firmware is needed specifically for the programmer, before that there was the GTi14-T106 firmware. We need a dump merged from the microcircuit. Or for the firmware of the 25q256 chip. USB firmware won’t work. The PC is not turning on at the moment.

« Previous Page