support1 lud14 Hi there, The Secure boot is disabled by default. When flashing the the BIOS, if any errors, please send us the pictures, we wil know what happened.
dahjah my secure boot is off my usb is loaded just like the the pic “lud14” posted, I’ve tried what I could understand in the video with fs3 and ls and all I keep getting is “is not recognized as an internal or external command…”
dahjah support1 That “fs3:” seems to have worked so far. The thunderbolt port opened up and all connected is working again. Thanks!
dahjah Well al worked great yesterday, I shutdown a few times restarted a few times throughout the day just making sure all was well, and it was until this morning. This morning the thunderbolt port isn’t working again after shutting down over night.
support1 dahjah Hi there, Please turn off the PC , unplug the power supply and other USB devices, then put the pin in the CMOS pinhole and press it for about 10 seconds , restart the PC after ten minutes. Here is the tutorial https://url.bee-link.cn/5FdW
Joseitogreg The firmware update is done for efi shell opcion no for efi usb device in the boot menu after pulse f7
Twinklekapoor It appears the EFI USB Device option is not appearing. Try to see if the USB drive is properly formatted, that USB boot is turned on in the BIOS, and try resetting or updating the BIOS. Let me know if that works!
yasdum I have gt14i, and get ic 0 active section error 3 IC 0 update error 7. So have can i flash the firmware?
Hankydooodle yasdum I encountered this same error yesterday when I tried to flash. Were you able to get it working or still running into the same issue?
vitasonline yasdum I have gt14i, and get ic 0 active section error 3 IC 0 update error 7. So have can i flash the firmware? If you get these errors, your Thunderbolt chip does not need to be updated. You have the latest firmware! I tried to reinstall the same firmware and got exactly the same errors 3 and 7.
support1 Hi there, Here is the new firmware https://dr.bee-link.cn/index.php?dir=uploads%2FGTI%2FGTi14%2FBIOS-EC%2FNew-GTi14-Thunderbolt-Chip-Firmware @Beelink User yasdum Hankydooodle
Beelink User support1 Thanx a lot, Support1! Thunderbolt, have been updated to the new firmware, without any questions.
vitasonline support1 Hi there, Here is the new firmware https://dr.bee-link.cn/index.php?dir=uploads%2FGTI%2FGTi14%2FBIOS-EC%2FNew-GTi14-Thunderbolt-Chip-Firmware @Beelink User yasdum Hankydooodle Hi support1, Please explain why you named the HUB firmware Thunderbolt firmware? This firmware New–Thunderbolt-firmware–ASM2307MPTool_v2013.zip has nothing to do with Thunderbolt. ASM2307 is a USB hub chip and HUB Firmware Solve the problem of high power consumption during shutdown and hibernation. After the update, turning on the fast startup function in the system will not affect power consumption. Also, this firmware ASM2307MPTool_v2013_2024-08-26_5-37-12.zip has long been available on the Chinese Support site since 2024-08-26 and has nothing to do with Thunderbolt.
